How to make reliable phone plugs

The technological holes of the phone are the most vulnerable points of the device. This is where water will flow first; when the device falls into water, dust will accumulate there if, for example, you do not use headphones for a long time. In the end, just about anything can get there; seeds, tobacco, pellets, etc. remaining in your pocket. In order to protect your phone, or any other device, from external aggressive influences, a wide variety of protective cases, bumpers, glasses and similar accessories are sold. Some cases have silicone plugs to seal the holes, others do not. Which one to buy is an individual matter. And not for every phone model (or other gadget), you can find a case with plugs. Personally, no matter how much I searched for my phone, I couldn’t find anything like this anywhere. Not on sale, not even on the Internet. That's why I decided to make the plugs myself. And at the same time, he will share this master class with other users who, perhaps, have also encountered the same problem.
How to make reliable phone plugs

Will need


  • Scissors.
  • Pliers.
  • File or needle file.
  • Stationery knife.
  • Secondary glue.
  • Insulating tape.
  • A piece of plastic 2x10x10 millimeters.
  • Boring machine, with a 2mm drill and cutting disc.
  • Mini jack 3.5 mm plug.
  • Micro usb plug.

How to make reliable phone plugs

Making plugs


I will be making plugs for my phone, and therefore I took plugs that fit the connectors for this model.
How to make reliable phone plugs

The headphone jack is the same for all, but the charging connectors may differ, so before manufacturing you should make sure that the plug fits the connector. So, first you need to remove the brass plug itself from the rubber shell. To do this, we will use a technical scalpel (or a stationery knife) to make cuts along the entire length of the shell. Then, using pliers, tear off the sheath from the plug.
How to make reliable phone plugs

How to make reliable phone plugs

At the base of the plug there is a thickening, something like a brass skirt or ring. We need to cut off all the roots of the plug with a machine, flush with this very ring. Like this:
How to make reliable phone plugs

How to make reliable phone plugs

It is also necessary to cut off the top, in the thinnest place:
How to make reliable phone plugs

How to make reliable phone plugs

When you remove the “root” of the plug, it may separate into separate parts, this can be seen in the video:
How to make reliable phone plugs

It's not scary; Everything fits perfectly into place with just a few seconds of glue. Next, you should sand the sawn-off top and spine with sandpaper. Then you need to insulate the spine - apply a drop of instant glue to it, and stick a piece of insulating tape on it. Next, carefully separate the excess areas of the insulating tape with a scalpel.
How to make reliable phone plugs

How to make reliable phone plugs

How to make reliable phone plugs

At this point, the plug for the headphone jack is ready. Now let's make a plug for the charging connector. The principle of action for making this plug is not very different from the first option - we plug the plug into the connector, measure the required length, and cut off the excess bur with a machine.
How to make reliable phone plugs

How to make reliable phone plugs

Don’t forget to remove all thin brass contacts from the segment. There should be four of them there.Of course, we will isolate the cut off area, but just in case, it is better to remove the contacts. Then there is a small catch: having measured the length of the plug we need, we will not have any protrusions on it, by which we can later remove it from the connector, if necessary. Therefore, you should saw off the plug 1 millimeter longer. This will be needed when we glue the plug to the plastic base. Making a base takes 10 minutes! To do this, in a piece of plastic 2 mm thick, use a drill (or thin cutter) to make a groove for the thickness and width of the plug. One millimeter deep.
How to make reliable phone plugs

How to make reliable phone plugs

We will place that extra millimeter of plug length in this groove. Next, we cut the edges of the base to the parameters you need and process them with a file.
How to make reliable phone plugs

How to make reliable phone plugs

Now, using a second of glue, install a piece of the plug into the groove of the base.
How to make reliable phone plugs

How to make reliable phone plugs

There you go. We install plugs in the connectors and use them with pleasure.
How to make reliable phone plugs

How to make reliable phone plugs

As you can see in the video, the phone does not react to the plugs in any way - nothing is displayed in the quick access panel. Of course, these plugs may not be as effective against water as silicone ones, but they will perfectly protect the connectors from dust and debris. This is quite enough to protect your phone from damage. In addition, they are much more durable than silicone ones.
How to make reliable phone plugs

Watch the video


come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
3+three=
Comments (1)
  1. Guest Andrey
    #1 Guest Andrey Guests 5 February 2023 15:14
    0
    It can be made from silicone, which is, for example, for a car, or for a wood stove. It is denser than plumbing.