How to make a washbasin from a syringe and a plastic bottle

A washbasin is simply necessary in a country house or garden. If you don’t have a house and a stationary washbasin on your property, then it’s very easy to make one from a PET bottle and a disposable syringe. Such a homemade product will serve faithfully for a long, long time. There will be no pity for her even if she is stolen.

Will need

• Disposable syringe 5 ml.
  
• Plastic bottle 1.5-5 liters.
  
• Hot glue gun.
  
• Stationery knife.

Making a washbasin from a PET bottle and syringe

Be sure to take a syringe with a rubber piston at the end.

We take the rod and piston out of it and cut it evenly with a stationery knife at about the “4 ml” mark.

To make a mark on the bottle cap, trace the cut edge with a marker.

And quickly apply it to the bottle cap.

Using the printed mark, cut a hole.

Insert a piece of the syringe and secure it tightly with hot glue.

Put the piston back in.

At this point the valve for the washbasin is ready.

Made for 5 liter and 1.5 liter bottles.
Now we pour water, hang the bottle and screw the lid with the valve to it.


Now if you touch the valve with your hands, water begins to flow.To speed up its flow, make a small puncture in the top of the bottle.
With a five liter bottle everything is exactly the same.


You need to cut a window in the upper part so that you can pour water at any time without removing the washbasin.


The water itself does not flow out of the washbasin; the piston clearly blocks the leak.

Watch the video