Mini-wash from leftover PVC pipes and bottles

Mini-wash from leftover PVC pipes and bottles

From a few pieces of PVC pipe and a plastic bottle, you can make a simple sink for your bicycle, motorcycle or even car.
This type of sink operates from a central water supply and the principle of its operation is as follows: If you simply open a pipe with water, then the pressure in it will immediately drop and, therefore, its pressure will not be so strong. This washer, thanks to the bottle, will accumulate pressure, as a result the output pressure will be stable for a short time.

Making a simple mini-wash


Berm two PVC triangles.
Mini-wash from leftover PVC pipes and bottles

Using a piece of pipe, we connect them and place them on glue.
Mini-wash from leftover PVC pipes and bottles

Mini-wash from leftover PVC pipes and bottles

We blank out one side of the triangle - it will not be needed later. This elongated plug will serve as a support for the entire structure.
Mini-wash from leftover PVC pipes and bottles

You need to insert a bottle (2 liters) into the middle of one triangle. To do this, use a lighter to heat the seat and insert the neck.
Mini-wash from leftover PVC pipes and bottles

Mini-wash from leftover PVC pipes and bottles

As soon as everything has cooled down, take out the neck, coat it with glue and insert it again. Re-fix the top with glue.
Mini-wash from leftover PVC pipes and bottles

We glue pipe sections into the elbows from the triangles to connect the hoses.
Mini-wash from leftover PVC pipes and bottles

We take the faucet and glue the body of the plastic handle into it - this will be the nozzle for the water outlet.
Mini-wash from leftover PVC pipes and bottles

Mini-wash from leftover PVC pipes and bottles

On the other side we make an exit for the hose.
Mini-wash from leftover PVC pipes and bottles

The installation is connected to the central water supply. We connect the hose from the outlet to the sink.
Mini-wash from leftover PVC pipes and bottles

Mini-wash from leftover PVC pipes and bottles

We connect the outlet from the sink to a gun with a nozzle.
Mini-wash from leftover PVC pipes and bottles

We serve water. We wait until the pressure inside the bottle increases and it is half filled - this is how it should be (the air has compressed inside).
Mini-wash from leftover PVC pipes and bottles

Now open the tap and wash your favorite equipment.
Mini-wash from leftover PVC pipes and bottles

Mini-wash from leftover PVC pipes and bottles

As soon as the pressure weakens, close the tap and wait until the pressure in the bottle is restored.
Mini-wash from leftover PVC pipes and bottles

The pressure of such an installation is quite enough to knock down dirt in hard-to-reach places.

Watch the video


come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (0)