Decoration of wedding glasses
In order to beautifully decorate the glasses we will need: baked plastic in 2 shades, 2 types of beads, beads, superglue, stained glass paints, a blank sheet of paper, a brush and, of course, the glasses themselves.
1. Wash and degrease the surface of the glasses well, then rub them with a soft cloth.
2. Spread a clean sheet of paper on the surface on which we will work so that the plastic does not get dirty.
3. Take the plastic, knead it well and roll it into thin tubes.
4. Using a knife, cut the plastic into small pieces. We make the pieces in 3 sizes.
In order for the flowers to turn out different, we will need to cut 20 small fragments, 20 larger pieces and 10 largest ones from light plastic. From dark plastic we cut 15 small pieces, 10 larger pieces and 5 large ones.
5. Take a piece of plastic and roll it into a circle.
6. Carefully crush the circle on your palm with your finger and get a thin pancake.
7. Using two fingers, we fasten one side of the pancake and get a beautiful petal.
8. Thus, we process all the cut fragments, after which we combine the individual petals into a flower. For each flower you will need 5 petals.
9. We can additionally decorate our glasses with unusual curls. To do this, roll out pieces of plastic into very thin tubes and twist them in any shape until you like the result.
10. Place the molded flowers and curls on a plate and bake in the oven (on each package of plastic, the manufacturer indicates the required temperature and baking time). We take our elements out of the oven and let them cool well (It is best to bake plastic in a well-ventilated room, so open a window or vent and remove all food from the table. Manufacturers indicate that plastic is not toxic, but if you leave it in the oven for a little while, it may give off an unpleasant odor).
11. Using superglue, attach the flowers and curls to the glass. We work with glue very carefully.
12. After our flowers are glued, we apply glue to the gaps between them (we do everything very carefully and use a very small amount of glue, because it spreads very much over the surface of the glass) and sprinkle with beads.
13. In this way we decorate the glass in the places we need, using 2 types of beads and beads.
14. Let the glue dry well, and as a final finishing touch, use a thin brush to apply a small amount of stained glass paint to the flower petals.
1. Wash and degrease the surface of the glasses well, then rub them with a soft cloth.
2. Spread a clean sheet of paper on the surface on which we will work so that the plastic does not get dirty.
3. Take the plastic, knead it well and roll it into thin tubes.
4. Using a knife, cut the plastic into small pieces. We make the pieces in 3 sizes.
In order for the flowers to turn out different, we will need to cut 20 small fragments, 20 larger pieces and 10 largest ones from light plastic. From dark plastic we cut 15 small pieces, 10 larger pieces and 5 large ones.
5. Take a piece of plastic and roll it into a circle.
6. Carefully crush the circle on your palm with your finger and get a thin pancake.
7. Using two fingers, we fasten one side of the pancake and get a beautiful petal.
8. Thus, we process all the cut fragments, after which we combine the individual petals into a flower. For each flower you will need 5 petals.
9. We can additionally decorate our glasses with unusual curls. To do this, roll out pieces of plastic into very thin tubes and twist them in any shape until you like the result.
10. Place the molded flowers and curls on a plate and bake in the oven (on each package of plastic, the manufacturer indicates the required temperature and baking time). We take our elements out of the oven and let them cool well (It is best to bake plastic in a well-ventilated room, so open a window or vent and remove all food from the table. Manufacturers indicate that plastic is not toxic, but if you leave it in the oven for a little while, it may give off an unpleasant odor).
11. Using superglue, attach the flowers and curls to the glass. We work with glue very carefully.
12. After our flowers are glued, we apply glue to the gaps between them (we do everything very carefully and use a very small amount of glue, because it spreads very much over the surface of the glass) and sprinkle with beads.
13. In this way we decorate the glass in the places we need, using 2 types of beads and beads.
14. Let the glue dry well, and as a final finishing touch, use a thin brush to apply a small amount of stained glass paint to the flower petals.
Similar master classes
Particularly interesting
Comments (1)
