Decoration of wedding glasses

Glasses for the bride and groom are a special attribute of the wedding table. The newlyweds are the center of attention throughout the event, so everything that surrounds the couple should be beautiful and memorable. Decorating wedding glasses has become a tradition. Glasses are decorated with ribbons, beads, lace, flowers made of cold porcelain or beads. Decorations are glued to glass glasses using super glue.

Let's try to decorate wedding glasses with our own hands. For this glass from our photo we will need white satin ribbons 0.5 cm wide, super glue and scissors.

wedding glasses


We will wrap the glass with satin ribbon. There is no need to cut the tape right away; we will do this after part of the ornament is glued to the glass. Gently lubricate the tape with glue and begin gluing it something like this.

Satin ribbon


We do the same on the back of the glass.

do it on the reverse side


And on two opposite sides we make two more such elements, for a total of four.

we make two more such elements


Wrap the stem of the glass with the same tape; do not forget to lubricate the tape with glue first.

Wrap the stem of the glass


Now set the glass aside and let it dry a little. During this time, we will make five such bows from the same satin ribbon.

we will make it from the same satin ribbon


We glue four bows onto the glass at the top of the pattern.

Glue four bows


And the fifth bow needs to be glued to the bottom of the leg.

glue to the bottom of the leg


This is how you can easily decorate wedding glasses.

The second glass is decorated in the same way. You can diversify it a little and make a glass for the bride from a pink ribbon, and for the groom from a blue one.

Craft stores sell a variety of ready-made lace or sewing items. This is an excellent material for decorating wedding glasses. In addition to lace to decorate the glasses, we will need pearl beads, gold or silver braid for sewing and good glue. Let's try to make a glass like this from these materials.

decorate wedding glasses


We cut out a beautiful ornament from a piece of lace.

lace cut out a beautiful ornament


Gently coat the cut out pattern with glue and paste it onto the glass. Remember that super glue dries very quickly, so it is better to apply glue not to the entire surface of the lace at once. It is better to lubricate part of the pattern with glue, then stick it on the glass, then again lubricate part of the lace and repeat the procedure. And so on until you have pasted the entire pattern.

paste the pattern


We will decorate the stem of the glass with beads. Glue them in a circle on the bottom of the leg.

we decorate with beads


Then we do the same with the upper part of the leg.

beads on the stem


When gluing decorations to glass goblets, you need to make sure that the glue does not bleed through the surface. This may spoil the appearance of the device. It is best to use a waterproof transparent glue that will not leave any marks when it dries.

You need to make two rings from silver or gold sewing braid and stick them on the base of the glass.

wedding glasses


We make the second glass in the same way as the first. Such glasses will not go unnoticed on the wedding table.
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
4 minus one =
Comments (0)