Rose brooch

Spring will come very soon and we already want warmth and bright colors. Creativity will help you shake off the winter gloom, namely, creating a decoration from bright pink polymer clay - a brooch in the shape of a rose. Rich shades and a combination of green and pink will lift your spirits, and the brooch itself will perfectly complement any outfit, even the most formal one.
In order to ultimately get a rose brooch, we need to stock up on the following:
- polymer clay of three colors: pink, white and green, and we will need just a little white to slightly dilute the original pink color in the buds;
- thick corrugated paper to give the petals texture;
- basis for brooches;
- glue for attaching the rose to the base;
- varnish for coating the finished product.
You should have a stationery knife, a pusher or a wooden toothpick, and a piece of foam rubber on hand so that the semi-finished product does not become deformed during operation.

Rose brooch


Knead the pink polymer clay and tear off several approximately equal pieces - these are the future rose petals.

tools


We take equal pieces of pink and white plastic and mix - we get a pink color of a lighter shade.

Kneading pink polymer clay


We form blanks of petals from light pink plastic.

Take equal pieces


We take one light piece and form the base of the bud, giving it the outline of a droplet.

Forming petal blanks


Using a knife and a pusher, we cut the top of the base and give it the appearance of the middle of a rose.

Take one light piece


Take a piece of crepe paper and press it against the base of the rose to give the material a distinctive texture.

cut the top

Take a piece of corrugated paper


Take a light pink piece, knead it into a petal-like cake, wrap it in corrugated paper, and squeeze it.

knead into a flat cake

wrapped in corrugated paper


We texture all the petals, sticking them to the base of the bud sequentially, placing one on top of the other.

squeeze


The rose is ready.

Texturing all the petals


Now we will make buds. We repeat everything we did at the beginning when creating the rosette.

Rose

we'll make buds


Roll out a small layer of green clay, sharpen the edge and wrap it around the bud. We apply corrugated paper. This is how we create two buds on legs.

we'll make buds

Roll out a small layer

wrap it around the bud


Let's start creating the sheet. To do this, take a larger piece of green plastic and give it the shape of a rose leaf, texture it with corrugated paper and, using a pusher, apply a pattern of veins and make teeth along the edges.

wrap it around the bud

Let's start creating a sheet


Take a piece of green clay and form a circle the size of the brooch base.

Let's start creating a sheet


To this base we sequentially attach a leaf and two small buds. We use a knife to cut off the excess at the bottom of the rose so that it sticks well to the base.

Take a piece of green

fasten the sheet

two small buds


Lastly, we attach the rose to the plastic base, carefully pressing it with a pusher or stick through the middle of the bud.

held up well on base


Now we put this whole composition in the oven for about half an hour (temperature 110-120 degrees).
After cooling, glue the composition onto the brooch base and cover with varnish.

Rose brooch made of polymer clay


This spring brooch is ready to delight you and those around you!

Rose brooch made of polymer clay

Rose brooch made of polymer clay
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (0)