How to restore plastic products using cable ties

If the plastic is cracked, then there is no need to immediately run to the store and buy a new part. Firstly, it can be very expensive (for example, a car bumper), and secondly, it cannot be found if it is a product from previous years of production. But it can be restored using available materials and tools.

Do-it-yourself restoration of cracked plastic

We clean the plastic from dirt and dust. We return its parts to their original position using the elastic properties of the material.

We fix the damage site on the front side with aluminum tape, gluing it along the cracks.

We embroider and grind from the inside of the crack with a suitable milling cutter and a grinding stone.

Remove the plastic shavings with a knife blade and wipe the damaged area with a clean napkin.

We replace the narrow soldering iron tip with a wide one and, softening the plastic along the cracks, we make transverse “stiffening ribs” that strengthen the parts of the product on the sides of the cracks.

We bite off the ends of the cable ties and, filling them with a glue gun, fill the recesses along the cracks with molten plastic.

After it has cooled, we cut off the weld seams, sand it with sandpaper and coat it with acrylic spray.

We remove the aluminum tape from the front side and make sure that the damage site has been restored and is almost invisible during visual inspection.

Watch the video

Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
4 minus one =
Comments (0)