5 ideas for renovation and home use
Tricks and useful ideas have always been valued both in renovation and in everyday life. They make life a lot easier and simpler. Sometimes you won’t even guess what can be done from seemingly simple things. Here is just a small part of 5 useful tips that will definitely come in handy in life.
1. Useful revision of the level
Example: when concreting a steel post for the construction of a fence, it is necessary to keep it strictly level. For this, a building level is usually used.
But the tool does not stay in a vertical position. To fix this, you just need to modify it. To do this, remove the side plastic plugs and insert small neodymium magnets on the sides -
Now the level is perfectly fixed and it has become very convenient to use.
2. Knife sharpener
Making a knife sharpener from available materials is very simple. You will need roofing fasteners, sandpaper and a screw with a nut.
Remove the washers from the roofing fasteners.
We fold the sandpaper in half and drill it.
We put a washer on the screw, then paper and another washer. We fix it with a screw. We cut the sandpaper in a circle.
Now we clamp the screw in the screwdriver chuck and quickly sharpen the knife blade.
3. Devices for high-altitude painting
To paint in high-altitude and hard-to-reach places, you can equip an aerosol can with a simple device. This design can be assembled in 5 minutes. Let's take a handle from a mop or broom.
We attach the balloon to it with masking tape. Let's take the electrode, bend it and insert it into the tape winding as in the photo.
The bottom line is that when you press the end of the electrode, the can should “throw out” the paint.
We wind a long cord or wire to this tip.
Now, holding the handle, the balloon can be lifted high up. And if you pull the cord down, the can should paint.
4. Cable organizer made from PET bottles
You don’t have to buy expensive organizers to put your wires together beautifully and neatly. It is enough to take a PET bottle, unravel it onto the tape using scissors or homemade bottle cutter.
Next, wrap the tape around a steel pin or tube and blow it with a hair dryer.
The tape will take the shape of a spiral and is perfect as a wire organizer.
5. Turbo brush
Making a turbo brush is very simple. To do this you need to take a regular brush.
Drill it in the middle and insert a long bolt, securing it with a nut.
Next, install the resulting device into the screwdriver chuck.
And we produce active pipe cleaners.
High-quality and durable drills on AliExpress at a discount - http://alii.pub/5zwmxz