How to clean a bathroom drain with stranded wire
The cause of clogged bathtub siphons is hair and fur. They accumulate inside and block the possibility of draining water. It will not be possible to break through such a blockage with a plunger or dissolve it. You can remove hair from the drain without disassembling it in a simple and quick way.
What you will need:
- Regular stranded wire insulated;
- knife or pliers.
Siphon cleaning process
It is necessary to take a piece of stranded wire with wire insulation 20-25 cm long, and strip the edge of its insulation by 10-15 mm. This is done with pliers, a stripper or a knife.
Then you need to fluff the core like a brush, bending the wires at the top of the insulation.
After this, the edge of the wire fluffed to the sides is lowered into the siphon and wrapped inside.
The wire will catch the hair, after which the instrument is removed and cleaned.
This way, you can pull out the entire formed plug in a few times.