No electricity needed! A simple gas soldering iron for welding polypropylene pipes

No electricity needed Simple gas soldering iron for welding polypropylene pipes

This device is useful when welding plastic pipes where for some reason there is no electricity. Its manufacture does not require high skill, scarce materials or high costs.

Required


To make parts and assemble them into a functioning device, we will need the following materials, products and tools:
  • steel pin;
  • metal clamp with bolts;
  • welding nozzle for plastic pipes;
  • gas-burner;
  • pliers;
  • bench vice;
  • hammer.

The procedure for manufacturing a machine for welding plastic pipes


Clamp the pin in the middle in a vice in a vertical position. We heat its upper part in the flame of a gas burner and bend the end 90 degrees using pliers.
No electricity needed Simple gas soldering iron for welding polypropylene pipes

No electricity needed Simple gas soldering iron for welding polypropylene pipes

Then we turn the pin 180 degrees and, again holding it in a vice, heat the other end of the pin at a slightly longer length. Again, using pliers, bend the second end, but into a ring.
No electricity needed Simple gas soldering iron for welding polypropylene pipes

If it does not turn out perfect in one go, then periodically heating the uneven ring, we align it with pliers both in the plane of the bend and in the transverse direction.
No electricity needed Simple gas soldering iron for welding polypropylene pipes

We disassemble the steel clamp and clamp the half with the weld nut in a vice and straighten the “ears” 90 degrees so that they become a continuation of the sidewalls of the half clamp.
No electricity needed Simple gas soldering iron for welding polypropylene pipes

We screw the nut of the clamp half without the “ears” onto the thread of the end of the stud, rotated 90 degrees. Moreover, the vertical sides of the half-clamp should be oriented strictly along the stud.
No electricity needed Simple gas soldering iron for welding polypropylene pipes

Unscrew the welding nozzle for plastic pipes. We insert the bolt with one half into the ring at the other end of the stud and screw the second half of the nozzle onto the bolt on the other side of the ring and tighten it tightly with the socket head.
No electricity needed Simple gas soldering iron for welding polypropylene pipes

No electricity needed Simple gas soldering iron for welding polypropylene pipes

We put the half-clamp on the end of the gas burner nozzle and securely fasten it with a bolt and nut using a socket nut.
No electricity needed Simple gas soldering iron for welding polypropylene pipes

If the welding nozzle is shifted relative to the longitudinal axis of the gas burner flame, then the position of the nozzle is changed by heating the pin in the middle and bending it in the vertical and horizontal plane until the desired result is achieved.
No electricity needed Simple gas soldering iron for welding polypropylene pipes

To connect a plastic pipe with a coupling or fitting, we heat the welding nozzle in the flame of a gas burner, then melt the plastic elements on it and connect them together. After cooling, they will create a strong and tight connection no worse than when using a factory device.
No electricity needed Simple gas soldering iron for welding polypropylene pipes

No electricity needed Simple gas soldering iron for welding polypropylene pipes

No electricity needed Simple gas soldering iron for welding polypropylene pipes

No electricity needed Simple gas soldering iron for welding polypropylene pipes

Watch the video


come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
4 minus one =
Comments (2)
  1. Yuri
    #1 Yuri Guests November 8, 2019 11:14
    1
    How to determine the temperature? Should I buy a pyrometer? It's cheaper to take a normal iron.
  2. Mikhail Gromov
    #2 Mikhail Gromov Guests 29 May 2020 16:35
    2
    I do this when the space is narrow and it’s difficult to place the iron. The temperature can be easily controlled with a thermocouple multimeter. Its accuracy is much higher than that of an average iron without microcontrol.