How to make plastic for DIY

Lovers of making things with their own hands crafts made from soft materials often do not have the opportunity to buy raw materials in specialized stores. There is a way to make homemade plastic yourself; for comparison, let’s look at three options for components.

What you will need


How to make plastic for DIY

It is necessary to prepare potato starch for the main filler, ordinary PVA glue, PVA wood glue and Titan glue as binders. To knead the mass, you need to have a small plastic container, maybe a glass. Experiments are carried out using pliers, a needle file and a drilling machine.

Operating procedure


There are many different recipes for making plastic (cold porcelain) on the Internet; it is difficult to understand which one is better. It is better to compare in practice, which is why we will prepare the three most common compositions.
For convenience, pour the starch from the pack into a container of appropriate volume.
Pour 2-3 teaspoons of starch into a small plastic cup to prepare the first batch, add some simple PVA glue to it.
How to make plastic for DIY

You don’t need to pour a lot at once, it’s better to add more as needed.
How to make plastic for DIY

Start mixing with a teaspoon, the composition should be homogeneous.Glue or starch is added as needed. As it thickens, it becomes more and more difficult to work with a spoon; remove the mixture from the container and continue stirring with your fingers.
How to make plastic for DIY

The mass should be the same as the dumpling dough. Roll it out into a pancake about 5 mm thick and leave it on the table. After each kneading, do not forget to wash your hands; water-based adhesives are made with water and are easily removed.
How to make plastic for DIY

The same mixture should be prepared using PVA wood glue. Differences will already appear - the mass is more rigid, it is a little more difficult to roll it into a thin layer.
How to make plastic for DIY

How to make plastic for DIY

Now mix the starch with water-insoluble Titanium. The process is no different from the above.
How to make plastic for DIY

How to make plastic for DIY

All samples should be thick; if too soft, they will crack as they dry due to shrinkage. In our example, only plastic with ordinary PVA glue had such a drawback; the rest dried without cracks.
How to make plastic for DIY

Make another cake from the remaining starch, but now add water to it. You will also need it for experience. After 4 hours, the pancakes are still not salted; leave them for three days.

Tests


First, you should check the materials for hardness; to do this, you should cut them a little with a needle file.
How to make plastic for DIY

The hardness of plastic with PVA is normal, the cake is sawed perfectly and does not crumble. The starch could not stand up to the water and immediately began to crumble.
The version with wood glue also has excellent hardness and can be processed without problems.
How to make plastic for DIY

The version with Titan glue can be processed and is almost no different from the two with PVA glues.

Drilling holes - testing for ductility


The sample on water is drilled without any effort, there are no chips, only dust.
How to make plastic for DIY

All others are plastic, curled chips appear. The sample with wood glue has the highest hardness and ductility; the chips are wound around the drill.
How to make plastic for DIY

Now you should check the samples for bending resistance


How to make plastic for DIY

Using pliers, bend all the cakes one by one. The sample on water breaks very easily, as you would expect.
A little more force must be applied when breaking a sample with PVA, but the parameters are insufficient. The reason is a significant number of microcracks throughout the entire volume.
How to make plastic for DIY

The sample with Titanium breaks with force; at the break, the structure resembles natural porcelain. The plastic is light and durable, quite suitable for use.
The most difficult thing to break is a piece of wood glue.
How to make plastic for DIY

As studies have shown, the sample with wood glue has proven itself best, with Titanium filler in second place. But you need to keep in mind that it takes more time for wood glue to completely harden. It is not recommended to prepare plastic for crafts from ordinary PVA glue.
How to make plastic for DIY

Conclusion


In all physical parameters, the first place is confidently taken by a composition with PVA wood glue, but the material has a yellowish tint, which is not always convenient. If you need to have durable white, then it is recommended to use PVA glue with a plasticizer as a binder. The starch does not have to be potato starch; you can also use corn starch. Despite the fact that these are elementary tests, the result can be taken into account.

Watch the video


come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (0)