DIY solar wax melter

Every beekeeper is faced with the procedure for processing wax raw materials. This is done in order to obtain pure wax, which can later be exchanged for foundation.
To process wax raw materials, you can make a wax refiner. The operating principle of such a device is based on heating the wax raw material to the melting point. The designs of wax melters are approximately the same. But different materials can be used for their manufacture. The most effective, economical and popular material for the manufacture of solar wax melters is glass.
The sizes of the wax grinder may vary. In this case, the wax melting box will be 1 * 0.7 * 0.4 m.
Let's look at the process of making a glass solar wax melter.
1. For work we will need pieces of glass of the same thickness. You can use not whole glasses, but assemble the walls of the wax furnace from parts. The glass must first be washed and dried.
DIY solar wax melter

2. Let's start marking the glass. To do this, cover the work surface with a thick cloth. Then we place the glass on the table and use a ruler and a simple pencil to mark the glass blank.
DIY solar wax melter

3. Then mark the cutting line using a glass cutter.
DIY solar wax melter

4. Place the glass on the edge of the table so that the cut line is on the edge. Carefully and sharply break off the glass along the cut line.
DIY solar wax melter

5. We do this with all the parts for the wax melting box. In total, in this case we will need 4 pieces of glass for the walls and 2 pieces for the bottom.
DIY solar wax melter

6. To glue the pieces of glass together, we will need transparent silicone and a special gun.
DIY solar wax melter

7. Cover the work surface with oilcloth. Then we lay out 2 glasses that will serve as the bottom of the box. We glue both glasses together using silicone.
DIY solar wax melter

DIY solar wax melter

8. Press the glass halves well against each other. Remove excess silicone using a rubber spatula.
DIY solar wax melter

9. This is what the bottom of the box looks like:
DIY solar wax melter

10. Next, lubricate the adjacent long and short sides of the bottom of the box with silicone.
DIY solar wax melter

11. Attach 2 side windows. In this case, we connect the sidewalls with silicone at the corner joint.
DIY solar wax melter

12. Lubricate the remaining sides of the bottom with silicone.
DIY solar wax melter

13. First, we attach the long side of the box.
DIY solar wax melter

14. Then we attach the short side of the box.
DIY solar wax melter

15. While the silicone is still wet, check all sides using a square.
DIY solar wax melter

16. Next, you need to cut out glass stands for the container in which the wax will be located. To do this, cut out 2 squares measuring 5*5 cm and two rectangles measuring 5*30 cm.
DIY solar wax melter

17. Glue the stands at a distance from each other, stepping back from the edge on each side by 10 cm.
DIY solar wax melter

18. You also need to cut 4 triangles to support the lid.
DIY solar wax melter

19. Attach the triangles to the corners of the box, departing from the top edge an amount equal to the thickness of the lid glass.
DIY solar wax melter

20. The lid on the box will also be made of glass. For ease of use, you need to make handles on the top of the lid. To do this, cut out 2 squares and 2 strips of the required size.
DIY solar wax melter

21. Glue the parts of the handles onto the lid.
DIY solar wax melter

DIY solar wax melter

22. Cut out the protective parts for the lid.
DIY solar wax melter

23. Glue the protection on the outside along the edges of the lid.
DIY solar wax melter

24. Inside the wax melter box, you can glue several auxiliary glasses to support the wax container. The height of the container can be adjusted using boards.
DIY solar wax melter

25. In the finished wax melter we place a container with wax raw materials and a container for clean wax.
DIY solar wax melter

26. The glass structure will be warmed up by solar heat from all sides. This way the wax will melt faster.
DIY solar wax melter

27. Thanks to the internal inclined design, clean wax quickly runs into an empty container.
DIY solar wax melter
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
3+three=
Comments (0)