Clamp "Bead"

By using ribbon and large beads you can get a luxurious decoration, perfect for festive hairstyles.
Clamp Bead

To make the Bead clip you will need:
- clamp.
- blue tape, no more than 25 mm wide.
- scissors.
- center for flowers.
- lighter.
- glue gun.
- beads with a diameter of 4 mm.

Creation of the “Bead” decoration.
The decoration is one large flower, consisting of narrow petals with beads. You need to start creating this decoration by preparing the petals. To do this, you will need pieces of blue tape 9 cm long. In total, 19 such pieces need to be made.
Clamp Bead

Exactly in the center of all segments it is necessary to make a mark on the edge line.
Clamp Bead

You need to bend the edge of the segment on the right side to the marked mark.
Clamp Bead

Then do the same on the left side, but be sure to ensure that the edge lines are parallel to each other.
Clamp Bead

The resulting triangular parts should be folded in half along the edge lines.
Clamp Bead

The edges, held with your fingers, should be trimmed with scissors and singed to secure the ribbons together.
Clamp Bead

Based on the fold lines running along the top, measure down 5 mm and cut off the remaining part of the tape. The resulting sections must be immediately treated with fire to secure them.
Clamp Bead

The result is long petals.
Clamp Bead

There will be 19 of them in total.
Clamp Bead

The created parts must be combined together, forming an even circle.
Clamp Bead

One transparent bead should be sewn in the center of each petal, placing them closer to the edge.
Clamp Bead

The second row of beads must be sewn 5 mm further, but placing them between the petals. As a result, the petals are curved.
Clamp Bead

From the remaining amount of tape, it remains to prepare a small circle, reaching a diameter of 5 cm. Its edge needs to be scorched.
Clamp Bead

This detail will be the basis for decoration. It must be glued to the underside of the flower, positioned strictly in the center.
Clamp Bead

You need to attach the clamp to the resulting base, carefully lubricating it with glue.
Clamp Bead

All that remains is to straighten the petals and attach the center for the flowers, covering the center of the intersection of the parts.
Clamp Bead

The “Bead” decoration is ready!
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
3+three=
Comments (0)