How to make a convenient and simple organizer for drills

Almost everyone keeps their drill bits in a drawer. As a result, to find one thing you need, you have to sort through the whole heap. By making this organizer, you can store drill bits in a visible place.

Materials:

• plywood 6 mm;
  
• M6 studs 41 mm and 66 mm – all 4 pcs.;
  
• M6 nuts – 28 pcs.;
  
• M6 cap nuts – 8 pcs.

Organizer manufacturing process

4 rectangular parts are cut out of plywood. The size of two is 160x335 mm, two are 121x160 mm and one is 133x160 mm.

Based on the size of the three smaller blanks, it is necessary to print a paper template with marks for drilling mounting holes for drills of different diameters. Their sizes must be signed. After this, the templates are glued to the plywood.

Using double-sided tape, you need to connect large pieces at the corners. A pair of smaller ones are glued to them on the sides. The middle part 133x160 mm is glued onto the latter in the center.

At the next stage, through holes are made in the corners of the workpieces in order to fasten them together.There will be a total of 8 holes.

Next, the large lower workpiece is detached. After this, the mounting holes for the drills are drilled according to the glued templates. For each of them, a drill of the appropriate diameter is used.


To assemble the parts, 8 M6 studs are prepared. You need to put a nut on them. Then the pins are inserted into a large blank, in which 8 holes are made. Short ones are placed in the corners, long ones in the center.


A second large part with perforations for drills is installed on top and tightened with nuts. Next, another nut is screwed on, and identical perforated parts are placed on them. On short studs, they need to be tightened with cap nuts.


Short nuts are screwed onto the long studs and the remaining part is installed. It is clamped with cap nuts. Now all that remains is to arrange the drills according to size.

Watch the video