How to make a garden watering can from a canister and cutting a pipe

When manually watering plants, it is convenient to use a garden watering can for accurate and comfortable dosing of water. It allows you to do targeted watering at the root, practically without eroding the soil or flooding the leaves. If you have an unnecessary plastic canister, you can make a watering can yourself, completely adjusting the length of its spout to your wishes.

Materials:


  • a plastic canister with a handle offset into a corner;
  • sewer or water plastic pipe;
  • diffuser for a watering can or PET bottle;
  • epoxy adhesive.

How to make a garden watering can from a canister and cutting a pipe

Watering can manufacturing process


To make the spout of a watering can, you need to cut a piece of plastic pipe of a convenient length.
How to make a garden watering can from a canister and cutting a pipe

It is optimal that when docked with the side of the canister at an angle of 45 degrees, the tube should be slightly higher.
How to make a garden watering can from a canister and cutting a pipe

In this case, when filling the watering can to the top, water will not splash out through the spout. Having cut the tube to the required length, you also need to cut one end of it at 45 degrees.
How to make a garden watering can from a canister and cutting a pipe

The edges of the pipe at both ends should be sanded.
How to make a garden watering can from a canister and cutting a pipe

The cutting is applied with a beveled end to the front side of the canister closer to the bottom. Then the pipe is outlined with a marker.
How to make a garden watering can from a canister and cutting a pipe


You need to cut a hole in the canister for its installation. It is made slightly smaller in diameter than the drawn outline in order to leave room for gluing the pipe.
How to make a garden watering can from a canister and cutting a pipe

It is necessary to cut a window under the handle of the canister to fill the watering can and allow air to enter it for normal drainage of water. Due to its location, the neck is not suitable for this, since when the lid is removed during watering, water will flow through it.
How to make a garden watering can from a canister and cutting a pipe

Then you need to prepare epoxy or other reliable two-component plastic adhesive. It is mixed according to the instructions in the proportion strictly specified in the instructions. With its help, you need to glue a diffuser for a watering can or summer shower into the even end of the tube. If there is no such thing, then it can be made from cutting the neck of a PET bottle with a plastic cap from instant coffee or nut butter glued on, in which many holes are drilled.
How to make a garden watering can from a canister and cutting a pipe

The tube with the diffuser is glued to the canister.
How to make a garden watering can from a canister and cutting a pipe

How to make a garden watering can from a canister and cutting a pipe

How to make a garden watering can from a canister and cutting a pipe

Here it is advisable to degrease all surfaces so that the spout holds as tightly as possible. The glue is applied before gluing, and then on top of the joint, this will give a complete seal. If you have leftover spray paint, you can paint the watering can after the glue has dried, making it almost indistinguishable from the store-bought one.
How to make a garden watering can from a canister and cutting a pipe

How to make a garden watering can from a canister and cutting a pipe

Watch the video


come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
4 minus one =
Comments (2)
  1. Sergey K
    #1 Sergey K Visitors 5 May 2020 17:55
    3
    Looking at such advice from foreign masters involuntarily prompts the thought - is life really so good for them? How much should a garden watering can cost (we have 1-2 bucks maximum) to be so perverted?
    1. Vityai
      #2 Vityai Guests May 6, 2020 07:40
      2
      I don’t know how many “bucks” your watering cans cost, in Russia they cost from about 100 Rubles for plastic ones and about 400-500 Rubles for metal ones
      and regarding the “invention” it would be worth strengthening the spout with a crossbar