How to make a stool from an old shock absorber

Such an element furniture in Techno style will decorate not only a summer gazebo, living room, kitchen, but also the interior of a bar. It can be made without much expense, time and effort, if you have the skills to handle metal tools.
How to make a stool from an old shock absorber

Will need


Before we start, let's prepare:
  • shock absorbers and springs from cars;
  • profile pipe;
  • steel strips;
  • primer;
  • wood glue;
  • MDF board;
  • spray paint;
  • nuts, washers, screws;
  • plastic inserts;
  • self-adhesive felt pads.

To work you will need: grinder, measuring instruments, welding, drill, jigsaw, router, etc.

The process of making a stool


How to make a stool from an old shock absorber

We disassemble and separate the shock absorbers from the springs.
How to make a stool from an old shock absorber

Use a grinder to cut off the mounting points from the shock absorbers.
How to make a stool from an old shock absorber

How to make a stool from an old shock absorber

We cut the rectangular pipe into 6 parts: 2 equal sections twice as long (taking into account the profile) 4 sections also of the same length.
How to make a stool from an old shock absorber

We lay the long section with the narrow side on a flat surface and weld two short sections exactly in the center at right angles on both sides and get a symmetrical cross.
How to make a stool from an old shock absorber

We cut 8 square fragments from a steel strip 6 cm wide.Using a grinder, we give them a round shape, turning them into “nickels”, which we weld to the ends of the beams of the “crosses”.
How to make a stool from an old shock absorber

How to make a stool from an old shock absorber

We clean the shock absorbers with a grinder and install them vertically with the base in the centers of the “crosses” and weld them securely. We cover everything with black primer.
How to make a stool from an old shock absorber

How to make a stool from an old shock absorber

We cut 4 squares of equal size from the MDF board and glue them in pairs using wood glue. We compress them while the glue sets with clamps.
How to make a stool from an old shock absorber

How to make a stool from an old shock absorber

We divide a wide steel strip into two halves, mark them and drill 1 hole in the center and 4 in the corners. We countersink the corner holes for screw heads, and drill them in the center with a Forstner drill.
How to make a stool from an old shock absorber

Having removed the clamps, on each two-layer block, having found the center, we draw inscribed circles with a compass and cut them out with a jigsaw. We grind the discs on a grinder, and use a milling cutter to remove chamfers around the circumference.
How to make a stool from an old shock absorber

How to make a stool from an old shock absorber

We place steel plates on the disks in the center and transfer their outline to MDF circles. Using a Forstner drill and a drill, we make a recess in the center and mill the marked contour to the depth of the plate with a router.
How to make a stool from an old shock absorber

How to make a stool from an old shock absorber

How to make a stool from an old shock absorber

How to make a stool from an old shock absorber

We cover the circles and springs with black primer, and after the primer has dried, we also paint the springs with orange paint.
How to make a stool from an old shock absorber

How to make a stool from an old shock absorber

We put spacers on the top of the springs, and rest the bottom against the supports on the shock absorbers. We insert covers into the spacers, plates and rings on top and tighten with nuts, compressing the springs. Screw on the nut and tighten securely. We cut off part of the rods above the nuts.
How to make a stool from an old shock absorber

How to make a stool from an old shock absorber

How to make a stool from an old shock absorber

How to make a stool from an old shock absorber

We close the ends of the beams of the crosses with plastic inserts, tapping them with a rubber mallet. We place steel plates in the recesses of the seats and fasten them to the MDF with screws.
How to make a stool from an old shock absorber

How to make a stool from an old shock absorber

After removing the protective film, we glue heavy-duty felt pads onto the supporting “nickels”.
How to make a stool from an old shock absorber

We place the stools on the supporting parts and make sure that they not only look great, but also perform their functionality perfectly.
How to make a stool from an old shock absorber

Watch the video


come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (0)