How to make a dispenser from a plastic bottle cap and use cases

This life hack will definitely come in handy for everyone from a housewife to a car mechanic. This dispenser attachment can be used in many sectors of our life. It’s very simple to make, even in nature, in order to sprinkle some water on the kebab, and this is just one idea out of a dozen different applications, which will be discussed in more detail below.
How to make a dispenser from a plastic bottle cap and use cases

Will need


  • Fire source: candle or lighter.
  • A sharp, long object: a wooden skewer, a metal knitting needle, or something similar.
  • Scissors.
  • Long nose pliers.

Making a dispenser nozzle from a plastic cap


Use pliers to take the lid upside down. Light the candle flame and hold the lid over it in the center.
How to make a dispenser from a plastic bottle cap and use cases

There is no need to bring it very close to the flame. After about 10 seconds the plastic should warm up. Remove the lid and use the tip of a skewer to gently push through the softened plastic. The skewer should not be very sharp - it is better to use it a little in advance.
How to make a dispenser from a plastic bottle cap and use cases

There is no need to rush either, everything is done smoothly, almost effortlessly.
Attention: As soon as you pull out the “nose”, don’t pull out the skewer, wait for it to cool completely. Then we soak it in water for final cooling and only then take out the skewer.
How to make a dispenser from a plastic bottle cap and use cases

We take scissors and use them to cut off the tip of the spout of the required diameter, depending on what the dispenser will be used for. If for a thick liquid, then cut closer to the base so that the hole is larger and the liquid comes out faster.
How to make a dispenser from a plastic bottle cap and use cases

Ready! Our dispenser attachment is ready.
How to make a dispenser from a plastic bottle cap and use cases

Use Cases


There can be dozens of applications for such a useful thing, and I will give only a few that come to mind. And you will understand how useful and even irreplaceable this thing is!
The dispenser nozzle can be applied:
  • For mixing cocktails, alcoholic and non-alcoholic drinks.
    How to make a dispenser from a plastic bottle cap and use cases

  • For dosing sunflower oil, sauce, vinegar, etc.
    How to make a dispenser from a plastic bottle cap and use cases

  • For dispensing glue.
    How to make a dispenser from a plastic bottle cap and use cases

  • Like a funnel for filling small volumes.
    How to make a dispenser from a plastic bottle cap and use cases

  • Like a pastry syringe, if you cut off the neck of the bottle and put on a bag with a lid. Decorate cakes and cover with icing.
    How to make a dispenser from a plastic bottle cap and use cases


Can even be used in the garage: as an oil can. In general, there are a lot of applications, I think you will understand this yourself.

Watch the video


come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (0)