Hood mounting problem
I bought a range hood, simple but not exactly cheap. I came home and was about to attach it to the kitchen, when suddenly I removed the gas pipe that was in the way. The manufacturer made standard fastenings: for fastening to the wall, which of course I couldn’t do because of the pipe.
I found a way out of the situation: I bought 6 corners. They are not expensive, they cost me 8 rubles apiece. Why 6? Because the hood will be attached in 3 places and one mount will require 2 corners. Fastening will occur as follows:
First, I will screw all 6 corners to the hood and see how everything goes.
The pipe protrudes at its largest point 5 centimeters from the wall. The corners give a distance of 8 centimeters, plus you can adjust from 5 to 15 centimeters.
Then everything is according to the standard: we attach the corners to the wall and to the hood, then we hang the hood and connect the corners of the wall and the hood, fastening them with bolts.
That's all, I hope it's useful to someone.
I found a way out of the situation: I bought 6 corners. They are not expensive, they cost me 8 rubles apiece. Why 6? Because the hood will be attached in 3 places and one mount will require 2 corners. Fastening will occur as follows:
First, I will screw all 6 corners to the hood and see how everything goes.
The pipe protrudes at its largest point 5 centimeters from the wall. The corners give a distance of 8 centimeters, plus you can adjust from 5 to 15 centimeters.
Then everything is according to the standard: we attach the corners to the wall and to the hood, then we hang the hood and connect the corners of the wall and the hood, fastening them with bolts.
That's all, I hope it's useful to someone.
Similar master classes
Particularly interesting
Comments (2)
