Top 9 ways to desolder a chip

Top 9 ways to desolder a chip

Beginners who are just starting to learn the basics of soldering have difficulty desoldering microcircuits. It's really not easy, but only if you don't use tricky tricks. Let's look at the best of them.

Soldering a microcircuit with a soldering iron


If you only have a soldering iron, then you need to lubricate the soldering area with flux and warm up all the outputs by moving the tip along them. From the reverse side, the microcircuit is pryed off with tweezers or a screwdriver. It needs to be pulled back. It is necessary to heat all the outputs evenly, and when they melt, the component is dismantled.
Top 9 ways to desolder a chip

Using a syringe needle


The leads of the components are lubricated with flux, then they are heated one by one with a tip and a syringe needle is placed on them. Since it is made of steel, tin does not stick to it. As a result, the soldered leg of the component will remain inside it, and the needle itself will then easily come out of the solder that has solidified outside.
Top 9 ways to desolder a chip

Working with a desoldering pump


It is very easy to desolder the chip with a desoldering pump. Before working on it, the trigger is cocked, then the solder on the leg is melted with a soldering iron. After this, the nozzle of the tool is placed on the liquid tin and the button is pressed. As a result, it absorbs all the solder.
Top 9 ways to desolder a chip

Top 9 ways to desolder a chip

Top 9 ways to desolder a chip

Using braid (PSB wire)


You can use a special braid to absorb solder. It is moistened with flux and applied to the output of the microcircuit. You need to melt the tin, and it will flow onto the braid, since it is hygroscopic.
Top 9 ways to desolder a chip

Instead of a purchased one, you can use braided TV cable. Due to its large size, it absorbs much more tin.
A stranded strand also pulls tin out of a regular cable. It's not as good as braid, but it works too.
Top 9 ways to desolder a chip

Application of a wire spiral


You can strip the wire and wind its copper core onto a needle or thin awl.
Top 9 ways to desolder a chip

The resulting flux-wetted spiral is applied to the heated terminal of the component. The tin will flow into this tube and the leg will remain free. While the solder has not hardened, you can shake it out of the tool to use the spiral further.
Top 9 ways to desolder a chip

Solder removal by wire insulation tube


You need to remove the insulation from the wire. This tube is pulled onto a heated terminal with molten tin. You need to wait a couple of seconds and rip it off. All the solder will be in it, and the leg of the microcircuit will be freed.
Top 9 ways to desolder a chip

Solder thinning with Rose alloy


A small amount of Rose's alloy needs to be melted near the component's outputs to get it onto the solder. Tin diluted with it will melt at lower heat. This will allow you to heat all the legs with a soldering iron without overheating the board and remove the chip.
Top 9 ways to desolder a chip

Top 9 ways to desolder a chip

Removal with a hairdryer


The outputs of the microcircuit can be heated with a soldering hair dryer and simply remove the desired component. It is best at this moment to pull it off on the back with tweezers. It's quick and easy, but using a hair dryer causes the board to overheat.
Top 9 ways to desolder a chip

Soldering with a hairdryer and Rose alloy


You can tin the legs of the microcircuit with Rose alloy, and then melt the diluted tin with a hairdryer. After this, the alloy must be removed so that during further soldering it does not spoil the fresh solder.
Top 9 ways to desolder a chip

Top 9 ways to desolder a chip

Watch the video


come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
4 minus one =
Comments (0)