Children's furniture - high chair

The child grows, new needs appear: a high chair, for example. It turned out that in the store a quality item costs at least 4000 rubles. And safety is the most important thing.
Materials:
1. 10 mm birch plywood, sold in sheets of 1.5 m * 1.5 for approximately 300 rubles. You will need one sheet, of course, not delaminated;
2. Furniture corner 15*15 – 20 pieces. Various corner options are possible;
3. Furniture self-tapping screw – 9mm – 40 pieces. There is a large selection, you might like something;
4. Stain or furniture varnish – nuances to choose from;

Children's furniture - high chair


Tools:
• Pencil, square, tape measure;
• A jigsaw or a good hacksaw is an important and obvious factor;
• Screwdriver or screwdriver – there would be a desire to twist;
• Coarse sandpaper. It will take very little;



Making a high chair with your own hands is based on a simple algorithm:
1. We choose sizes and shapes individually for your child, as well as taking into account the available tools, and draw them to scale on paper, and then transfer them to plywood. It is recommended to draw identical or mirror parts by tracing the first one;
2.Sawing is the most difficult and time-consuming process. This is where you'll most likely regret not asking your friend for a jigsaw, although it all depends on the complexity of the shapes. The sawn edges are then processed with sandpaper;
3. Assembling our construction set will take much less time if you use, for example, a drill, in the absence of a screwdriver. And generous use of the corners will give the product additional strength. It is important to prevent the screws from being overtightened to avoid losing their meaning;




4. By covering the chair with varnish, for example, “mahogany”, we get a reliable, attractive and inexpensive object furniture. By the way, the amount of expenses did not exceed 600 rubles.

come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
4 minus one =
Comments (2)
  1. Alexander
    #1 Alexander Guests November 18, 2013 04:47
    2
    What kind of junk is this? with iron brackets for fastening, it's like a horror movie.
  2. Azat
    #2 Azat Guests 2 January 2014 21:15
    0
    Not bad! Can we do even better?