We sew our own reusable protective mask

In the modern world, along with the emergence of viruses that pose a threat to human health and life, the presence of a protective mask becomes more relevant than ever. You can buy disposable masks at the pharmacy, but it will not be cheap, and you will look faceless in them. It is much more profitable to stock up on reusable masks that will last you a long time and highlight your individuality. Nowadays, protective masks are becoming a kind of fashionable addition to your image. Therefore, you can use all your imagination and make a unique mask with which you will not only not be afraid of viruses, but will also make you stand out in the crowd.
We sew our own reusable protective mask

Making a reusable protective mask with your own hands


1. We choose natural fabrics for making a protective mask: 100% cotton, so that you feel comfortable in it. Be sure to make a double mask so that you can insert protective gauze or a bandage folded in several layers into it.
2. Make mask patterns. In Fig. 01 presents ready-made mask patterns with all the dimensions necessary for construction.Please note that the patterns already include all allowances for processing; there is no need to add anything! We build two rectangles: one with dimensions 22.2x18.5 cm, the second with dimensions 14.0x6.7 cm. The first rectangle is a template for two parts of the mask at once: for the outer one with a height of 22.2 cm and the inner one with a height of 20.2 cm (there are notches along the upper edge of the mask on both sides, indicating the line of the inside of the mask). That is, the outer and inner parts of the mask along the upper edge differ in height by 2.0 cm; in all other sections they are absolutely identical. In the constructed rectangle we mark all the dimensions according to Fig. 01 and put the necessary notches. We cut out the patterns. We cut notches no longer than 0.5 cm so that they do not reach the seam line.
We sew our own reusable protective mask

3. Now we start cutting. Fold the fabric face to face in two layers. We lay out the patterns and trace them with a pencil or chalk for cutting, as seen in Fig. 02.
We sew our own reusable protective mask

First we cut out the outer mask, then we remove one part, and on the other part we connect the notches according to the pattern, where the height of the inner part of the mask is marked and cut off 2.0 cm (the difference in height between the outer and inner parts of the mask). The cut out cut of the mask parts is shown in Fig. 03.
We sew our own reusable protective mask

The outer and inner parts of the mask are folded together, all their notches are the same, but they differ only in height by 2.0 cm. On the strip under the elastic, you need to put notches on the hem at the top and bottom to process the edges of the strip, as can be seen in Fig. 04 and 05. The cut is ready.
We sew our own reusable protective mask

We sew our own reusable protective mask

4. Let's start sewing the mask. We process the upper cut of the mask, turning it over and sewing 2.0 cm along the notch (1.0 and 1.0 cm) with a closed cut stitch, as shown in Fig. 06.
We sew our own reusable protective mask

We do this with the outer and inner parts of the mask. We get the result in Fig. 07.
We sew our own reusable protective mask

The outer and inner parts of the mask still differ in height by 2.0 cm at the top, all notches coincide when combined at the bottom.
5. Fold the outer and inner parts of the mask back to back, matching and aligning them from the bottom edge, as shown in Fig. 08.
We sew our own reusable protective mask

Along the upper edge, the parts of the masks differ by 2.0 cm in height. At the top we go around the lower part of the mask with the upper part of the mask (2.0 cm) and stitch these areas on both sides, as in Fig. 09.
We sew our own reusable protective mask

There was a hole in the mask for a bandage or gauze folded in several layers. This can be seen in Fig. 10.
We sew our own reusable protective mask

6. Turn the mask inside out, folding the parts face to face and aligning them at the bottom. We connect the upper and lower parts of the mask along the lower edge with a seam 0.7 cm from the edge. The result in Fig. eleven.
We sew our own reusable protective mask

Turn the mask right side out, straightening the seam along the bottom edge of the mask, as seen in Fig. 12.
We sew our own reusable protective mask

7. Along the notches, we lay folds on both sides of the mask and pin them with needles with an eye, as shown in Fig. 13.
We sew our own reusable protective mask

We lay and pin the folds on the outer and inner parts of the mask together, and not separately. You get three folds on each side. We sew the folds on both sides with a seam 0.5-0.6 cm from the edge, as seen in Fig. 14.
We sew our own reusable protective mask

8. Now we process the elastic strips. Along the upper and lower cuts of the strips along the notches, we turn in and sew in hem allowances with a closed cut of 2.0 cm (1.0 and 1.0 cm), as can be seen in Fig. 15.
We sew our own reusable protective mask

The processed strips are shown in Fig. 16.
We sew our own reusable protective mask

9. Place elastic strips on the inside of the mask on both sides, face to face, as seen in Fig. 17, and sew a line 0.7 cm from the edge on both sides, as shown in Fig. 18.

We sew our own reusable protective mask

We sew our own reusable protective mask

We unfold the strips on both sides, as shown in Fig. 19.
We sew our own reusable protective mask

At the edges of each strip we turn in 1.0 cm, as can be seen in Fig. 20.
We sew our own reusable protective mask

Next, we fold each strip so as to slightly (by 0.1-0.2 cm) overlap the seam of attaching the strip to the mask, as can be seen in Fig. 22.
We sew our own reusable protective mask

We fasten with needles with an eye on the front side of the mask, as shown in Fig. 21, so that when laying a line it is convenient to remove them immediately.
We sew our own reusable protective mask

We lay a stitch on the outside of the mask along the seam of attaching the strip under the elastic to the mask, as shown in Fig. 23.
We sew our own reusable protective mask

Immediately remove the needles with ears. As can be seen in Fig. 24, the stitching on the outside of the mask is not visible, since it goes along the line of connection between the strip and the mask.
We sew our own reusable protective mask

But on the inside of the mask, as can be seen in Fig. 25, the line runs 0.1 cm from the edge of the strip.
We sew our own reusable protective mask

10. The mask is almost ready. In Fig. 26, on the inside of the mask you can see a pocket into which a bandage or gauze folded in several layers will be placed.
We sew our own reusable protective mask

All that remains is to insert an elastic band into the stripes on the sides of the mask. You can take the elastic band that you like best: you can use a round elastic band with a small diameter, for example, 0.2 cm, or you can use a flat one, 0.3-1.0 cm wide. We thread the elastic band with a pin into the holes in the strips for the elastic band, as can be seen in Fig. 27.
We sew our own reusable protective mask

Next, tie the elastic band, as shown in Fig. 28 to try on the mask and decide on the elastic band size.
We sew our own reusable protective mask

You can leave the elastic tied in a knot, or you can, having decided on the desired length, cut off the excess and connect the edges of the elastic with a stitch, if, of course, it is a flat elastic band and not a round one.
11. Figure 29 shows the finished mask on a person. If you want to change the size of the mask in height, for example, reduce it, then when cutting, you can experiment and remove one fold, pinning it with needles with an eye.You can also reduce the length of the mask by pinning the excess into the patterns, which you consider necessary to remove after fitting. Having ready-made patterns, it will not be difficult for you to adjust them and make a mask, for example, for a child.
We sew our own reusable protective mask
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (3)
  1. Guest Maxim
    #1 Guest Maxim Guests 18 April 2020 22:23
    1
    In Soviet times, every schoolgirl knew how to sew masks, such as NVP (initial military training). Put on your mask and work with an angle grinder for 1 minute, and you will understand where the dust is flying.

    PS. Your whole face will be covered in dust, around your lips, around your nose. And the virus is much smaller.
    1. Guest Yuri
      #2 Guest Yuri Guests 19 April 2020 15:21
      2
      This mask is not intended to protect a person from infection. It must catch the viruses that a person secretes out of myself when sneezing and coughing. The virus flies out in droplets of liquid, including very large ones. And the mask, at least halfway, stops them.
  2. Ivan Novoselov
    #3 Ivan Novoselov Guests 21 April 2020 15:42
    1
    If we look at the influenza virus under a microscope (electronic, it cannot be seen with a regular one), it turns out that its size is only 0.0001 millimeters. Let me remind you that the diameter of a human hair is 0.1 millimeters, that is, 1000 times larger. If you take a regular fabric medical mask, the average diameter of the holes in it (through which you breathe) is about 0.02 mm. That is, the virus enters this hole, much like a pea enters a football goal. But this mask won’t even protect you from the guards who will slap you with a fine, let alone from the virus