How to make a 12V mini circular saw

Modeling requires a miniature power tool, which is very rare. In this regard, you have to do it yourself, using universal kits of parts from AliExpress. An example of the use of such factory blanks would be the manufacture of a hand-held mini circular saw.
How to make a 12V mini circular saw

Materials:


  • engine 775 DC -
  • spindle assembly for a homemade model circular saw -
  • toothed pulley;
  • drive belt;
  • sewer pipes 32 mm and 50 mm;
  • 90 degree elbows for 32 mm pipe – 2 pcs.;
  • 90 degree elbow for 110 mm pipe;
  • plywood;
  • Super glue;
  • circular disc 110 mm;
  • battery.

Main parts such as 775 DC motor, spindle with circular disk clamp, drive belt and pulley can be ordered - . The rest of the materials are sold at the hardware store.

Making mini circulars


A pulley and a clamp for a circular disk are installed on the spindle.
How to make a 12V mini circular saw

It is then screwed to the plywood base. You need to place a stand under its sole so that the shaft is slightly raised.
How to make a 12V mini circular saw

A housing for the engine is made from a 50 mm sewer pipe.
How to make a 12V mini circular saw

To do this, take a segment equal to the length of the motor without the shaft.Also, a small piece of pipe is cut lengthwise, heated and flattened into a plate. A plug for the casing is made from it. It is glued to the end of the pipe with superglue. Before this, a hole is made in it for the motor shaft and its fastening. For convenience, the engine is first turned to the plug, and then it is glued to the pipe.
How to make a 12V mini circular saw

How to make a 12V mini circular saw

How to make a 12V mini circular saw

Wires are soldered to the motor contacts and lead out through a side hole in the housing. Then the pipe with the engine is sealed with a plug on the reverse side.
How to make a 12V mini circular saw

A wooden stand is glued to the motor housing. To make the glue hold more reliably, you need to sprinkle it on top with soda or sawdust. The stand with the motor is glued to the plywood with a spindle. It is placed so as to obtain sufficient tension on the drive belt wrapped around the motor and spindle pulleys.
How to make a 12V mini circular saw

How to make a 12V mini circular saw

To increase the rigidity of the structure, you need to glue a spacer between the spindle and the motor. AND
How to make a 12V mini circular saw

From the socket of the elbow for a 110 mm pipe, a protection for the disk is cut out. It is glued to the plywood and engine casing.
How to make a 12V mini circular saw

How to make a 12V mini circular saw

How to make a 12V mini circular saw

How to make a 12V mini circular saw

The saw handle is made of 2 elbows and a 32 mm sewer pipe bent by an arc. One end of it is glued to the spacer between the motor and the spindle, and the other to the plywood base.
How to make a 12V mini circular saw

How to make a 12V mini circular saw

How to make a 12V mini circular saw

To use the saw, you need to connect its motor with a long wire to a battery or power supply. For convenience, you can install a switch on the wire.
How to make a 12V mini circular saw

It is necessary to take into account that if the circular machine will be turned on for a long time, then it is worth drilling ventilation holes in the engine casing to cool it. As for the use of superglue to join parts, it, in combination with sprinkling with sawdust or soda, holds quite firmly.If such rigidity of the connection seems insufficient, then during assembly you can use self-tapping screws and self-tapping screws, which will be longer and more difficult.

Watch the video


Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
4 minus one =
Comments (1)
  1. Valeri
    #1 Valeri Guests 14 January 2021 18:41
    0
    a little more expensive but more reliable