Table with benches for the garden

This is an excellent monolithic table set with two benches. The design provides reliable support, so everything stands level and very strong. If desired, such a kit can be assembled in a few hours.

Layout and parts list

The structure is entirely built from boards - 89x38. You will also need screws 80 in length and studs with nuts and M8, washers.
Dimensions in millimeters.

We take a board, not necessarily the same size as mine, and start sawing. When using a circular saw, it is quite possible to complete the job in an hour.

Two benches with supports

We begin the assembly with the benches. We assemble a couple of them, and then attach them to a base of four boards.

Table

Now let's assemble the table. Its support is made in the form of a cross and this is one of the main difficulties. You will need to make a cut in a board half the thickness of the board. Then connect everything together, tightening it with self-tapping screws.

Connecting the table to the support

Now we connect the table to the base, where the benches already stand.

Please note that the table does not rest on the ground. The entire structure has four supports - these are the legs of the benches. Thanks to this, such a monolithic structure performs well on uneven or soft ground.
At the end of assembly, everything needs to be painted or varnished so that weather conditions do not ruin the table.

Result

This is a very simple and reliable combination of a table and benches. For a large company, you can't imagine anything better; there's enough room for everyone.