Rocking chair for mobile phone

Hello!

Here's a homemade product. Rocking chair for mobile phone.
A second use option is possible - as a business card holder.


The execution is very simple.


Material - furniture board, or plywood, or just a piece of board. PVA. A pair of clamps.
1 The sides of the chair are quarters of a circle, radius 96 mm. We cut it out with a jigsaw or a hacksaw and trim it with a sandpaper.
2 The back of the chair is a rectangle 100 by 55.
3 The seat of the chair is again a rectangle 50 by 55. (55 mm is the width for a small Nokia. If you make it for a smartphone, you need 65)
4 Cut it out of the board, sand it and mill it.
5 Glue the back and seat together.
6 Optional - after gluing, it would be good to smooth out the joint from below between the seat and back with sandpaper - so that there is no unpleasant step-roughness.
7 Then we glue the sides of the chair.
8 Optional - varnish
9 And also optional - drill a hole for the charging connector so that the phone can be charged while lying in a chair. In the photographed copy there is such a hole, it is in the seat under the phone.


All :)

come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
3+three=
Comments (3)
  1. CYRAX
    #1 CYRAX Guests March 3, 2011 21:03
    1
    Useless thing
  2. Zmey1982
    #2 Zmey1982 Guests March 3, 2012 00:45
    1
    Can you post the drawing?
  3. Sniper
    #3 Sniper Guests November 27, 2012 09:33
    1
    Need a drawing