How to make a cobra using origami technique

One of the large venomous snakes is the king cobra. If danger arises, it raises part of the body and the inflating hood in the neck area is visible. At the same time, the snake hisses and makes menacing lunges towards the enemy. But a cobra made of paper using the technique origami, does not pose any danger. You can create it if you follow the step-by-step photographs given in this master class.
How to make a cobra using origami technique

To create it you only need a square of paper. We used a red sheet.
How to make a cobra using origami technique

Fold the square diagonally.
How to make a cobra using origami technique

Then we make another fold. This way we outline the center of the workpiece, and the folds made will be useful for further work.
How to make a cobra using origami technique

We bend the top corner down (towards the center of the square).
How to make a cobra using origami technique

The side corners also need to be bent towards the center.
How to make a cobra using origami technique

We fold the upper part of the future cobra blank down.
How to make a cobra using origami technique

On one side we bend it inwards, forming a fold.
How to make a cobra using origami technique

On the left side we do the same. The upper part took on the appearance of a triangle.
How to make a cobra using origami technique

We bend one of the upper folds to the left.
How to make a cobra using origami technique

We bend it in the form of a small triangle upward.
How to make a cobra using origami technique

We turn right again.
How to make a cobra using origami technique

Take another fold and bend it to the right side.
How to make a cobra using origami technique

We also make a triangle-shaped fold on it.
How to make a cobra using origami technique

We turn the fold in the opposite direction again. A square has been formed, which will later become the hood of our cobra.
How to make a cobra using origami technique

Now let's start shaping the body of the snake. To do this, bend the side corners of the bottom layer towards the middle line.
How to make a cobra using origami technique

We repeat the same thing, narrowing the lower part of the workpiece.
How to make a cobra using origami technique

Finally, you need to narrow it again, making folds towards the midline. As a result, we got a narrow cobra body.
How to make a cobra using origami technique

Let's turn the snake blank over to the other side.
How to make a cobra using origami technique

Bend the top corner down, this will be the head of a cobra.
How to make a cobra using origami technique

The lower part needs to be bent back.
How to make a cobra using origami technique

All that remains is to form the tail. To do this, we will make several folds in the lower part. Our paper cobra using the origami technique is ready.
How to make a cobra using origami technique
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (1)
  1. Agolyaeva
    #1 Agolyaeva Guests 22 August 2017 14:59
    1
    Just right for elementary school. We did it during an after-school program - the little one was delighted! Thank you