Headband "Ryzhik"

Headband Ryzhik

To make this decoration you will need:
- an electrical device for burning fabric.
- red synthetic fabric and golden veil.
- templates for petals and leaves from a tin can.
- a small piece of glass.
- some green fabric in two shades.
- wire.
- a small foam base in the shape of an egg.
- “Moment” glue.
- any small decorations for the middle of the flowers.
- hair band.
- thin ribbon for the headband.
- a strip of thick fabric for the base.
- scissors.
- iron ruler.
Now let's prepare the main tool for work. We take a guilloche machine with a fabric needle and glass.
Headband Ryzhik

For the flowers, we chose a opaque, red-colored fabric and a thin golden-colored veil. From any tin can we cut out a template for the petals. The base will be a square with a side of 6 cm. On one side we cut out a figure similar to a flame with 3 tongues, and on the opposite side we make small narrowings from the bottom. Then we fold both fabrics together and use a hot needle to trace 19 blanks according to the template.
Headband Ryzhik

And for the leaves, the template is 5 cm high and 3 cm wide, boat-shaped with a blunt end on one side. The leaves will also be made of double fabric, and you will need to cut 5 pieces.
Headband Ryzhik

From the same fabric we cut out two rectangles with a needle, no longer than 5 cm and of different widths. We cut the fringe on them using a ruler.
Headband Ryzhik

And then the green blanks need to be given a new shape. You need to put two pieces with fringe together and just roll the cut side a little with your fingers. You can burn simple patterns on the leaves. On one side of the sheet we will make teeth along the edge, and on the second half we will cut out several holes in the shape of drops and dots. Finally, fold the leaves in half, making a fold.
Headband Ryzhik

And now we move on to the flower petals, which need to be given additional volume. You need to make counter folds on the base of the blanks and solder them together with a needle. We process all petals the same way.
Headband Ryzhik

Additionally, we cut out two strips measuring 5 x 2 cm from the fabric for the petals. And divide them diagonally in half. And along the edges of the resulting triangles we make small notches.
Headband Ryzhik

Because when twisted it creates an interesting shape.
Headband Ryzhik

And you will also need a sepal in the shape of an irregular star with 6 corners.
Headband Ryzhik

Cut out 2 circles with a diameter of 3 cm, which will serve as the basis for the flowers. Now let's start assembling. For one flower we take 8 petals and a circle. We will attach it to the base using a needle. The first row will consist of 4 blanks located along the outer edge of the circle.
Headband Ryzhik

We solder the remaining 4 petals in a checkerboard pattern, closer to the middle of the circle. The center remains vacant.
Headband Ryzhik

Both flowers are made in the same way.
Headband Ryzhik

Now all that remains is to choose decorations for the centers in colors. Take 2 large beads, stamens, balls or cones. Everything can be chosen according to your wishes.
Headband Ryzhik

And glue it in the middle, placing it beautifully on the flower.
Headband Ryzhik

But we also need a bud and for this we take a wire 10 cm long.We take a foam base in the shape of a quail egg, although it can be replaced with a foil blank, and glue it well onto the wire.
Headband Ryzhik

From the remaining 3 petals we will assemble a dense flower bud. Use the first blank to completely cover the base, and the rest can be coated with glue on half of the petal. The top edges will be free.
Headband Ryzhik

Then you need to attach 4 sharp blanks in a circle from below and glue the sepals on top of everything.
Headband Ryzhik

All that remains is to cover the wire with a thin tape, the bud is ready.
Headband Ryzhik

Now we move on to processing the rim, which will serve as the basis for the entire composition. We cover the headband itself with ribbons of two colors to match the entire composition, but you can also use one ribbon. Then cut out 2 rectangles measuring 8 x 2.5 cm from a strip of thick fabric.
Headband Ryzhik

We round the edges, fold one piece in half lengthwise and make cuts on the fold. 2 notches each, with an interval of 1 cm, closer to the edges. Then we thread the headband through these holes. Next we glue the second part onto the first. It is necessary to take into account that this blank is located no lower than 10 cm from the edge of the rim.
Headband Ryzhik

Now you should start assembling the entire composition. Let's start with the bud. We retreat 4 cm from the top of the base on the rim and attach the bud itself with glue. And we attach the wire to the rim with a thin tape. The rest of the wire is glued to the base.
Headband Ryzhik

Next we place the green leaves, 4 will be on the base, and one in front of the bud. Then we glue the wide fringe onto the wire in front of the bud, and a small piece will be on the other side of the base between the leaves.
Headband Ryzhik

All that remains is to place two large flowers. They should be well secured along the edges of the base on the rim.
Headband Ryzhik

Now you need to check the wrong side and carefully correct everything.
Headband Ryzhik

The headband is ready.
Headband Ryzhik

Good luck to all!
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
3+three=
Comments (0)