Jellyfish hair clip made of satin ribbons

I propose to make a hairpin from satin ribbons that resembles a sea jellyfish in appearance. Such a beautiful bow will decorate a girl’s hairstyle; it can be worn to kindergarten, school, or used as an element of a costume at a matinee.
Making a bow is not difficult, although it will take a little work, since you will need to make a lot of elements for the hairpin.
To make a hairpin you need:
  • narrow satin ribbon 6 mm wide;
  • felt mugs with a diameter of 4 cm 2 pcs.;
  • tweezers;
  • silicone glue;
  • candle;
  • clamp;
  • foil;
  • wooden sticks with a diameter of 4 mm.

Jellyfish hair clip made of satin ribbons

The hairpin is assembled from two main parts - a fluffy piece of short pieces of ribbon and long spirals.
1. So, we take satin ribbons, I use two shades that are close in color.
Cut them into 6 cm pieces.
Jellyfish hair clip made of satin ribbons

Jellyfish hair clip made of satin ribbons

For one hairpin you will need approximately 60 pieces of ribbon.
2. You will also need long pieces of ribbon, the length of which is 26 cm. I use 10 such pieces for one hairpin.
Jellyfish hair clip made of satin ribbons

In general, approximately 6.5 m of ribbon is required for one hairpin.
3.Now let's make spirals from the ribbons. For this we need wooden sticks.
Jellyfish hair clip made of satin ribbons

We wrap long pieces of ribbon around the sticks and secure them with pieces of foil along the edges so that the ribbon does not unravel. Wrap the sticks in foil and place in the oven for 10 minutes.
After the time has passed, wait until the foil cools down so as not to get burned and carefully remove the ribbons from the sticks. We get beautiful spirals.
4. We make loops from 6 cm pieces of tape. We connect the edges together, hold them with tweezers and secure them over the fire. Let's do the same with all the segments.
Jellyfish hair clip made of satin ribbons

Assembling the hairpin
5. On a felt base with a diameter of 4 cm, tightly glue 14 loops in a circle.
Jellyfish hair clip made of satin ribbons

6. Gradually fill the base with loops in a circle, gluing them as close to each other as possible. In total I glued 6 rows.
Jellyfish hair clip made of satin ribbons

Jellyfish hair clip made of satin ribbons

7. When there is a very small hole left in the middle, glue 5 loops together and glue them into the middle.
Jellyfish hair clip made of satin ribbons

Jellyfish hair clip made of satin ribbons

8. Turn the workpiece over and glue another row of loops in a circle, glue spirals on one edge, folding them in half.
Jellyfish hair clip made of satin ribbons

9. Glue another felt circle on top, attaching a clip between the circles.
Jellyfish hair clip made of satin ribbons

Jellyfish hair clip made of satin ribbons

The hairpin is ready.
Jellyfish hair clip made of satin ribbons
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
3+three=
Comments (0)