Homemade plow for plowing the land

A do-it-yourself plow is a universal invention that is suitable for both plowing the land and planting potatoes. You can make a plow yourself from available materials. The proposed plow model consists of a control unit and a device designed for plowing (plow). The control unit is a stand, which consists of the main control elements and accessories. Namely:
1 – rectifier bridge (power supply).
2 – electric motor.
3 – gearbox combined with a gear.
4 – cable - 5 mm, acting as a winch.
5 – anchor (working part of the shovel).

Homemade plow for plowing the land


A plow, which is designed for plowing land, consists of the following elements:
1 – steering wheel (plow control lever).
2 – ploughshare.
3 – base with fastenings.

base with fastenings


Installation and connection of the plow.
1. The anchor must be installed at an angle for better support.

at an angle for better support


2. After which the anchor should be deepened into the ground up to the connecting strip.

go deep into the ground


3. Then the anchor is connected to the control device using a piece of reinforcement.

connected to the control device


4. In front of the barrier bar, near the cable, reinforcement is also driven in. It will additionally hold the control unit in place during operation.

Homemade plow for plowing the land


5. In the working position, the gearbox is in the engaged position.

Homemade plow for plowing the land


6. The control unit is ready for operation.

Homemade plow for plowing the land


7. After installing and securing the control device, attach the plow to it. To do this, the free end of the cable is attached to the base of the plow.

Homemade plow for plowing the land


Operating principle and operation.
1. The plow is carried to the required distance.
2. The ploughshare is driven into the ground to the required depth.

Homemade plow for plowing the land


3. The left foot is placed on the ploughshare, and the right foot rests on the ground.

Homemade plow for plowing the land


4. Thus, while moving the plow along the ground, the tiller pushes off with his right foot and controls the plow using his weight.

Homemade plow for plowing the land


5. During operation, the plow steering wheel should not exceed the level of the plowman’s belt.

Homemade plow for plowing the land


6. When the plow reaches the end of plowing, the control unit is turned off and the plow is again taken to the opposite side of the site. A plow made according to this principle is capable of plowing land that has been left without care for a long time.

plot


The plowed land has smooth and deep furrows.

plowed area


After plowing, the soil should be processed using a harrow. This is done in order to break up blocks of earth. To do this, instead of a plow, a harrow is attached to the control unit.

attach the harrow


They cover the ground according to the same principle as plowing.

harrow


The end result is an almost flat piece of land suitable for use.

Homemade plow for plowing the land
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
3+three=
Comments (6)
  1. N1tro
    #1 N1tro Guests August 22, 2017 09:24
    1
    A good option for homemade products, but there are questions, electricity is not always available, but the idea itself about alternative traction is excellent.
  2. Michurin
    #2 Michurin Guests April 24, 2018 08:35
    0
    And the gearbox, if I’m not mistaken, was taken from the railway - a switch drive.
  3. Guest Yuri
    #3 Guest Yuri Guests 15 July 2019 15:05
    0
    This is a turnout drive. Where can I buy one?
  4. Guest Vyacheslav
    #4 Guest Vyacheslav Guests January 10, 2021 00:22
    0
    Does the large gear on the shaft run along a key? Won't it cut it off?
  5. Guest Vyacheslav
    #5 Guest Vyacheslav Guests January 31, 2021 00:39
    0
    The large gear of the gearbox was ground or an original one.
  6. Vyacheslav
    #6 Vyacheslav Guests October 13, 2022 00:06
    1
    It would be nice to at least know the dimensions. Drum, frame.