Patriotic ribbon for Victory Day

Traditionally, on May 9, a parade is held in every city. This holiday is special - it not only symbolizes Victory, but on this day people remember the exploits of the older generation. One of the symbols of this special day is the St. George ribbon, which is pinned on the chest. But there is an alternative to such a symbol - a similar ribbon made from the colors of the Russian flag.

Patriotic ribbon for Victory Day


To create a ribbon you will need:
1. A narrow ribbon depicting the tricolor.
2. Satin ribbons 4 or 5 cm wide in three colors - white, blue, red.
3. Burner and glass.
4. Hot glue.

Patriotic ribbon for Victory Day


Fold the ribbon in the center to form one loop and glue the ends of the ribbon where they meet.

Patriotic ribbon for Victory Day


Under the ruler, cut the ends of the tape at an acute angle, as in the photo:

Patriotic ribbon for Victory Day


You need to cut squares from each ribbon. The size of the squares is either 5 by 5 cm, or 4 by 4 cm, depending on the width of the ribbon you choose. You will need two blanks of each color, except red. There should be three red squares.

Patriotic ribbon for Victory Day


To create a twig on a ribbon, you will need sharp curved petals, which are created using the technique kanzashi. The square element must be bent diagonally to form a large triangle.

Patriotic ribbon for Victory Day


Then, the workpiece is bent again in the center as shown in the photo.

Patriotic ribbon for Victory Day


The last fold is carried out along the center line of the triangle and then an acute angle is formed at the top of the element.

Patriotic ribbon for Victory Day


Use a burner to cut off the base of the blue petal. Under the temperature, the layers of the atlas are soldered and the petal is fixed.

Patriotic ribbon for Victory Day


Bend the petal in the other direction.

Patriotic ribbon for Victory Day


Do similar actions with all the blanks, and you will get the required number of petals for the branch.

Patriotic ribbon for Victory Day


Using hot glue, fix the petals in the center of the main tape.

Patriotic ribbon for Victory Day


Red and blue colors are glued in pairs directly to the tape.

Patriotic ribbon for Victory Day


The white pair of leaves are first glued together.

Patriotic ribbon for Victory Day


And then complements the twig on top.

Patriotic ribbon for Victory Day


The place where the branch originates is covered with a third red petal.

Patriotic ribbon for Victory Day


Turn the work over and use glue to secure a pin in the center of the piece. The pin is positioned horizontally.
The bright ribbon for the parade is ready!
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
4 minus one =
Comments (0)