Original and stylish beads

Hello, dear needlewomen! Today I bring to your attention a master class on making such original and stylish beads. I have them made in amber-turquoise tones. You can choose the beads and colors that you like best. Let's get started.

original and stylish beads


We will need:
• pliers
• side cutters
• round nose pliers
• pins with loops at the end
• chain with large links
• carbine
• jewelry rings for fastening with a diameter of 0.5 cm
• amber glass beads
• large figured beads of turquoise color

materials and instructions


We put small glass beads on the pin and bend it with our hands.

small glass beads


We take side cutters and cut off the pin, leaving approximately 1 cm.

cut off the pin


Now we need to make exactly the same loop on the second end of the bead. To do this, use pliers to grab the tip of the pin and bend it in the opposite direction. For example, if you bent the pin to the left with your hands, now you need to use pliers to bend it to the right. It turns out to be a beautiful loop.

beautiful loop


Let's do the same with all the glass beads that we plan to use in our work. These are the Cheburashkas we will get.

we can make cheburashki


Remember that at this stage there is no need to close our loops, leave them slightly open, we will close them a little later.
Next, we thread pins into our main beads and make rings in the same way. We do not close the rings. Show your imagination and try different combinations of shaped beads. I chose this combination for my beads.

such a combination


Now we need to assemble the scattered beads into a single whole. For me, this stage is the most interesting, because... Now we can already see how our product will turn out. If you decide to change your bead combination, do it now before it's too late.
So, with the help of the loops, which we prudently left slightly open, we can easily assemble the product. We close all the loops tightly with round nose pliers.

close with pliers


Using a connecting ring, we attach the bead that we focus on. I have this diamond-shaped bead, the same color as the main curly beads. You can highlight it with a different color if you wish. We thread the connecting ring into the ears of two amber beads and a diamond-shaped bead. Close the ring tightly.

Close the ring tightly


We measure out 3 pieces of chain. They don't have to be the same. On the contrary, let their lengths be slightly different. I have chains 6-7 cm long. We thread the connecting ring into the outer links of the chains, do not close the ring yet.

don't close the ring yet


We thread our ring with strung chains into the free eye of a diamond-shaped bead. Close the ring tightly.

Close the ring tightly


We measure out 2 more sections of the chain. Now it is desirable to make them the same. I have pieces 8 cm long.

it is advisable to make them the same


Using connecting rings, we attach the chains to the outermost amber beads.

attach chains


All we have to do is attach the clasp. I chose the carabiner. We attach it using a connecting ring to the extreme link of one of the chains.

connecting ring


The links of my chain are wide enough, so I can attach a carabiner to any of them, thereby adjusting the length of the product.

Links in my chain


original and stylish beads


Our beads are ready!

original and stylish beads
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
3+three=
Comments (0)