Simple mobile phone case

In order to make such an original case for a mobile phone, we will need: two pieces of thick fabric slightly larger than the phone itself, lace or beads or any stickers as decoration. Pieces of cashmere, drape, and leather are good for the cover itself. In my case, these were pieces of cashmere left over from sewing a coat. As a result, the phone case went very well with the embroidered coat.

We take the first piece of fabric, place our phone on it and trace its outline with a thin piece of chalk or dry soap. All operations are done on the front side of the fabric.

along the contour with a thin piece of chalk


We get the outline of our phone transferred to the fabric.

phone outline


We retreat from the resulting contour line outwards by 1.5 - 2 cm around the entire perimeter. It turns out something like an allowance for sewing two parts.

We retreat from the received line


We fold our two pieces of fabric inside out to each other. We pin around the perimeter with sewing pins to secure the fabric tightly and cut out both parts evenly. Cut along the contour of the intended outer line.

cut with scissors


We sew decoration elements onto both parts of our phone case. For this I had lace, from which I could cut individual elements in the form of flowers.Here, as they say, whoever has enough imagination and patience for anything can create an applique from all kinds of stripes, stickers, sequins, beads, buttons, make decorative embroidery or something else.

sew on flowers


We draw the outline of our mobile phone. If it was erased while working on the patch of decorative details, we will update it by circling the phone itself again. From the contour line of the phone we retreat outwards a distance equal to the thickness of the phone divided in half. If the fabric is elastic, then you can subtract from the resulting number of millimeters from one to two millimeters. This is done so that the phone does not fall out in the bag of their case and at the same time, so that it does not have to be pulled out with difficulty. From the open side of the cover we draw a line to the cut. Again we chop off two parts with a pin.

we fix


Using a machine, we stitch together both parts along the resulting outer line, stepping back from the open part of the cover 0.5 cm from the edge. Let's try out how the phone itself fits into the case. If it is very tight or weak, we adjust the stitching.

we sew


Carefully trim the edges of the cover with zigzag scissors. If you don’t have such scissors, you can sew any decorative stitch on a machine, or simply sew a zigzag stitch using a thread of some contrasting color and carefully trim the edge.

cut with curly scissors


As a result, we get an original handmade mobile phone case. This is a nice craft to carry with you in your purse; you can make it for a child or as a small gift to a friend. It is done quickly and does not require expensive costs.

Simple mobile phone case
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
4 minus one =
Comments (1)
  1. Milochka
    #1 Milochka Guests 26 August 2017 17:52
    0
    Stunning! Isn't it a miracle? I didn’t know that such a masterpiece could be created from ordinary material. So beautiful, I really liked it. I hope I can do the same!))