How to make a float to control the water level in a container from a distance

How to make a float to control the water level in a container from a distance

If you have a summer shower, you periodically have to climb the ladder to check the water level in the tank. To avoid this, you can insert a float into the barrel, which shows the degree of filling from the ground.
How to make a float to control the water level in a container from a distance

Materials:


  • a piece of polystyrene foam or polystyrene foam;
  • heat shrink tube or electrical tape;
  • plastic hanging flower pot holder

How to make a float to control the water level in a container from a distance

How to make a float to control the water level in a container from a distance

Control float manufacturing process


The first step is to measure the height of the tank from the inside from the bottom to the lid. The height of the float made should be the same. Next, take a plastic twig from a flower pot holder and sharpen it. Its second end with the mounting platform must be trimmed.
How to make a float to control the water level in a container from a distance

The resulting erase is stitched into polystyrene foam.
On the reverse side, the rod is fixed from below with a heat-shrinkable tube or electrical tape so that it does not fall back.
How to make a float to control the water level in a container from a distance

Its upper end needs to be made visible. To do this, you can wrap electrical tape or apply colored heat shrink. Now all that remains is to cut the foam in a circle to get a floating puck.
How to make a float to control the water level in a container from a distance

How to make a float to control the water level in a container from a distance

Instead of hanging pots, you can use a fishing float, extended with a cocktail tube, or other thin, lightweight rods.
How to make a float to control the water level in a container from a distance

To install the float, you will need to drill through the tank cap. Its antenna is then inserted into the hole and the lid is closed once the container is filled. As soon as the float drops completely and is no longer noticeable, it’s time to add water.
How to make a float to control the water level in a container from a distance

How to make a float to control the water level in a container from a distance

How to make a float to control the water level in a container from a distance

Watch the video


Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (0)