We clean the catch with a screwdriver right while fishing in a couple of minutes

Fans of fishing for pike, pike-perch and perch know how difficult it is to clean them afterwards. This is much more difficult than cleaning carp, crucian carp and other peaceful fish. To avoid pricking your fingers on the fins and spending hours scraping scales off your catch, it’s worth making a special attachment for your cordless screwdriver. Taking it with a screwdriver on a fishing trip, you can clean your catch right next to the pond in a matter of minutes, and take home the fish prepared before cooking.
We clean the catch with a screwdriver right while fishing in a couple of minutes

Materials:


  • 35 mm fluoroplastic rod or wooden handle for a shovel;
  • threaded rod M6;
  • M6 nuts – 2 pcs.;
  • M6 washers – 2 pcs.;
  • straight U-shaped hanger for drywall;
  • short screws – 8 pcs.

Cleaning head manufacturing process


For the nozzle, you need to prepare a blank from a fluoroplastic rod or a shovel handle. A workpiece 50 mm long is sufficient. The cylinder must be drilled from the end in the center. A through hole is made with a 6-7 mm drill.
We clean the catch with a screwdriver right while fishing in a couple of minutes

A threaded rod is then inserted into the hole.
We clean the catch with a screwdriver right while fishing in a couple of minutes

Nuts are screwed onto it on both sides. They press the cylinder through the washers.The stud is cut behind the workpiece so that there is a shank of sufficient length to be clamped in the screwdriver chuck.
Next you need to make teeth to remove the scales. For this purpose, a U-shaped suspension is used for installing drywall.
We clean the catch with a screwdriver right while fishing in a couple of minutes

One half of the perforated suspension is cut into 4 parts by cutting lengthwise and crosswise. After cutting, the teeth of the workpieces are bent at right angles. After this, the knives are symmetrically screwed to the cylinder with self-tapping screws. To do this, you need to make markings and drill holes for screws.
We clean the catch with a screwdriver right while fishing in a couple of minutes

We clean the catch with a screwdriver right while fishing in a couple of minutes

How to use the nozzle?


After fishing, you need to cut off the fins of the fish. In predatory fish they are sharp, so if you clean with them, you can get hurt. It is very convenient to cut them with scissors.
We clean the catch with a screwdriver right while fishing in a couple of minutes

Then the scales are removed against its growth by moving the attachment rotating in a screwdriver from the tail to the head. Protruding teeth tear off the scales in one pass. This allows you to process the side of a large fish in literally 20-30 seconds.
We clean the catch with a screwdriver right while fishing in a couple of minutes

We clean the catch with a screwdriver right while fishing in a couple of minutes

This cleaning method is very quick and easy. The only thing is that the scales from under the nozzle scatter in all directions. Therefore, the method is better suited for working near a reservoir, since it eliminates the need for cleaning. The attachment can be used to clean any fairly large fish. It is better not to process small change in the palm with its help, since the risk of the teeth catching your fingers increases.

Watch the video



come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
3+three=
Comments (2)
  1. Taras
    #1 Taras Guests 5 June 2020 09:58
    3
    Why such difficulties!? Buy a wire brush for your drill and you will be happy!)))))
  2. AlexIS
    #2 AlexIS Guests 27 September 2021 17:03
    0
    A long self-tapping screw without a head is perfect for small fish.