How to quickly and easily make a sheath from a plastic bottle

To safely carry a knife, sheaths and sheaths of various designs are used. Usually they are sold with a knife. If there is no sheath, then you can make one with your own hands from an ordinary plastic bottle. They will turn out to be very light and practical.
How to quickly and easily make a sheath from a plastic bottle

Materials:


  • plastic bottle;
  • aluminum rivets for rivet gun.

How to quickly and easily make a sheath from a plastic bottle

Scabbard manufacturing process


The bottom and neck of a plastic bottle are cut off. The resulting tube unfolds lengthwise. It is flattened and folded in half. The line is pressed down with a crease so that the plastic holds its shape.
How to quickly and easily make a sheath from a plastic bottle

The knife is applied with the butt to the bend line. Then, using a felt-tip pen or marker on the plastic, mark the transition line between the blade and the handle.
How to quickly and easily make a sheath from a plastic bottle

The top layer of double plastic is cut off from the handle side according to the mark made.
How to quickly and easily make a sheath from a plastic bottle

After this, the knife is placed between the two layers so that the beginning of the handle rests on the cut.
How to quickly and easily make a sheath from a plastic bottle

Then you need to make a small flap on the top layer, which will make it easier to get the blade into the sheath in the future. To do this, a trim is made at the plastic crease line by 3-5 mm, and the top is folded.
After bending the cuff, you need to cut the sheath to the shape of the knife.
How to quickly and easily make a sheath from a plastic bottle

To do this, he rests the butt against the crease line between the layers, and the blade is outlined with a marker. Cutting plastic with scissors is done with an indentation of 8 mm in the larger direction. It is important not to cut off part of the plastic under the handle; it will be needed later.
How to quickly and easily make a sheath from a plastic bottle

To connect the sheath, you need to melt several holes with a hot nail to a tolerance of 8 mm. Aluminum rivets are inserted into them. The distance between the rivets is kept to a minimum, approximately the size of a finger. The tail remaining at the top of the sheath is bent in half and also connected with rivets. The resulting loop will allow you to hang the sheath on a waist belt or cord to tie it to a backpack.
How to quickly and easily make a sheath from a plastic bottle

How to quickly and easily make a sheath from a plastic bottle

An alternative to rivets can be a lace made of synthetic material, which is passed through the fused holes like a thread and a needle. You can also stitch the sheath with thin PET tape cut from the same bottle.
The resulting sheath is very light. You can hide a knife in them when going on a hiking trip. They will prevent the blade from coming into contact with packed items, without making the knife more bulky and heavy. Depending on the color of the knife handle, the sheath can be made from a brown, green, yellow, black, red bottle to match them together.

Watch the video


come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
3+three=
Comments (0)