How to turn a drill into a router using simple equipment

It is not necessary to buy a factory-made milling cutter if there is a need for such a device, because it costs a lot of money. You can make it yourself from a household drill and the simplest materials.
How to turn a drill into a router using simple equipment

Will need


To transform a drill into a vertical router, before starting work, we will prepare the following materials and products:
  • round pipe;
  • steel strip and plate;
  • foundation or anchor bolts;
  • four nuts;
  • electric drill;
  • three locking bolts;
  • wood cutter.

To make the equipment and assemble it, we will need: a circular saw, a lathe and a drilling machine, a grinder, various files, a boring machine with two cutters, a tap with a driver, welding, a caliper, etc.

The manufacturing process of a drill-based router


Using a pendulum saw, we cut a ring of the required width from the steel pipe.
How to turn a drill into a router using simple equipment

We trim the ends on a lathe, remove burrs and smooth the edges. Using a boring head, we obtain the desired size of the internal diameter.
Using a drilling machine, we make three radial holes in the center of the side surface of the ring, spaced 120 degrees from each other.
How to turn a drill into a router using simple equipment

We clamp the ring in a vice and use a round file to remove burrs from the holes. Then we cut threads into them using a tap and a driver.
How to turn a drill into a router using simple equipment

We cut off two identical fragments from the metal strip with a pendulum saw.
How to turn a drill into a router using simple equipment

We make holes in them from one end on a drilling machine, using first a small and then a large drill.
How to turn a drill into a router using simple equipment

We weld the strips with the holes outward to the bottom of the side surface of the ring in diametrically opposite directions.
How to turn a drill into a router using simple equipment

Using a grinder with a cutting disc, we separate a part with a given width, length and thickness from the steel plate. Having removed the burrs and rounded the edges, we make a through hole in the center of the plate on a drilling machine using a core drill.
How to turn a drill into a router using simple equipment

Then, using a twist drill of the required diameter, we make two more through holes located along the long axis of symmetry of the plate closer to its edges.
How to turn a drill into a router using simple equipment

We cut off from the long bolts (studs) according to the markings the parts with heads that we will no longer need.
How to turn a drill into a router using simple equipment

How to turn a drill into a router using simple equipment

We end the remaining threaded rods on a lathe and, on the one hand, grind them to the specified length and diameter.
How to turn a drill into a router using simple equipment

We install the rods with grooves into the holes in the plate and weld them on the reverse side using electric arc welding. We carefully process the welding areas with a grinder and a cutting disc.
How to turn a drill into a router using simple equipment

How to turn a drill into a router using simple equipment

Screw one nut onto the stand rods, then install a ring with welded plates using the holes in them. We tighten one more nut on top.
How to turn a drill into a router using simple equipment

We insert the drill into the ring from above until it fits into the ring with a cylindrical belt on the body. We fix the drill with three bolts screwed into the holes on the side surface of the ring.
How to turn a drill into a router using simple equipment

We insert a wood cutter into the drill chuck and clamp it there.Then, lowering or raising the lower nuts on the stand rods, we set the required cutter overhang and tighten the upper nuts.
How to turn a drill into a router using simple equipment

To check the milling cutter in operation, turn on the drill, grab the rods in the area of ​​the nuts with your hands, place its base on the surface of the workpiece and bring the cutter to its end. Lightly pressing down, move the router in the desired direction. At the same time, we coordinate the feed rate with the cutter speed.
How to turn a drill into a router using simple equipment

How to turn a drill into a router using simple equipment

Watch the video


come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
3+three=
Comments (2)
  1. Guest Anatoly
    #1 Guest Anatoly Guests January 2, 2020 00:20
    3
    This router will work for an hour. It will unscrew the bushing.
    1. Yuri
      #2 Yuri Guests 2 January 2020 14:14
      0
      It's OK. At the speeds that the drill develops, the cutter works very poorly (you can even see this in the video), so it won’t be possible to spoil a lot of material.