A device for quickly applying plaster with your own hands

Hand plastering is a labor-intensive and difficult process. But if you mechanize it, you can do the job even without having any skills in this matter, and with high quality.
A device for quickly applying plaster with your own hands

Will need


You can assemble a plaster sprayer from the following materials and products:
  • round pipe;
  • strips of thick metal;
  • thin sheet metal;
  • bolts and flange nuts – 3 pairs;
  • round steel bar;
  • tap with handle;
  • extension springs;
  • a can of aerosol paint;
  • compressor at a pressure of 6-8 bar.

To work you need: hacksaw, grinder, grinder, hammer and mallet, vice, lathe and drilling machine, welding, gun for installing blind rivets, as well as protective gloves.

The process of making a plastering machine


We cut three pieces of different lengths from the pipe, and one from the metal strip. We process them on a grinder to remove burrs and rust. Moreover, we perform this and other operations with gloves so as not to damage our hands.
A device for quickly applying plaster with your own hands

We core the wall of a short tube along its diameter in three places - in the center and closer to the ends, symmetrically to the first mark.We drill holes along them: the central one is through, the side ones are one-sided.
We also perform three drillings in the strip workpiece, which should coincide in place with the holes in the short tube.
A device for quickly applying plaster with your own hands

A device for quickly applying plaster with your own hands

We bend the ends of the strip at right angles in one direction and get a part in the form of a symmetrical bracket.
A device for quickly applying plaster with your own hands

On a lathe, we drill central blind holes in three bolts from the head side.
A device for quickly applying plaster with your own hands

Then we cut the rods with a hacksaw and remove the undrilled parts.
A device for quickly applying plaster with your own hands

Using magnetic fastening, install the tube with the holes facing up and weld flange nuts to them. We screw the bolts with holes into them and tighten them with a wrench.
A device for quickly applying plaster with your own hands

Using a magnetic square, we weld the long tube at a right angle to the central through hole on the other side of the short tube.
A device for quickly applying plaster with your own hands

We weld a coupling with an external thread to the second end of the long pipe.
A device for quickly applying plaster with your own hands

We weld a bracket to the ends of the short tube of the resulting assembly so that its holes are opposite the drillings in the bolts.
A device for quickly applying plaster with your own hands

To one side of the bracket we weld a plate cut to size from a thin sheet of metal along its entire contour.
A device for quickly applying plaster with your own hands

On a lathe, we make a through hole in the center of a round steel rod, grind it to size and form a belt for the fitting.
A device for quickly applying plaster with your own hands

A device for quickly applying plaster with your own hands

We weld it to the pipe, placing a steel washer between them.
We screw a long tube into the tap on one side, and a short one with a welded fitting on the other.
A device for quickly applying plaster with your own hands

In the removed faucet handle, drill a hole for the spring and bend it longitudinally 90 degrees. We put the handle in place, insert one end of the spring into the hole, and weld the other to the tube.
A device for quickly applying plaster with your own hands

We cut out the elements of a hopper for the solution from a thin sheet of metal.
A device for quickly applying plaster with your own hands

We bend them according to the markings using a rubber mallet.We drill holes and connect the parts using blind rivets and a gun.
A device for quickly applying plaster with your own hands

We attach the hopper to the open side of the bracket so that the holes on its strip are aligned with the drillings in the bracket and fit snugly against them. We attach the handle horizontally to the top edge of the hopper using rivets.
A device for quickly applying plaster with your own hands

After painting, the plaster applicator is ready for use.
A device for quickly applying plaster with your own hands

A device for quickly applying plaster with your own hands

We connect the compressor hose to the fitting, put a portion of the solution into the hopper, open the tap, and begin intensively and efficiently plastering the walls.
A device for quickly applying plaster with your own hands

Watch the video


come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (1)
  1. Innocent
    #1 Innocent Guests 9 January 2020 19:50
    3
    I see intensely, but I don’t see qualitatively.
    *Doctor Dew.zhpg*