DIY air conditioner based on Peltier elements

This is a full-fledged and real air conditioner, unlike those that are given in large quantities on the Internet. There are no bottles of ice water, nor ice itself. And the principle of operation is quite similar to household models. I will say more that earlier, similar air conditioners with low-voltage power supply based on Peltier elements were used on trucks.
DIY air conditioner based on Peltier elements

If you are not familiar with this element, I highly recommend taking a closer look. In a nutshell, this is a thermoelectric module. It looks square, flat, with two wires coming out. When voltage is applied to which, one side of the module begins to heat up and the other to cool, and in direct proportion.
The cooler device, which will be discussed below, is based on this principle.
DIY air conditioner based on Peltier elements

Will need


  • Peltier elements - 6 pieces. Model TEC1-12705 designed for 12 V and 60 W, you can buy it here - AliExpress.
  • A power supply from a computer or any other with 12 V and a power of at least 400 W, you can buy here - AliExpress.
  • Wires 2.5 sq. mm. - a couple of meters.

DIY air conditioner based on Peltier elements

This is from the main one, see the text for other details and tools.

Manufacturing an air conditioner using Peltier elements


We will have a fairly powerful model, consisting of 6 elements, each 40x40 in size. For them, you need to select two massive radiators to compress the elements on both sides. I will use one large and two small ones.
DIY air conditioner based on Peltier elements

This is roughly what they will look like when combined.
DIY air conditioner based on Peltier elements

You need to cut a rectangle out of chipboard.
DIY air conditioner based on Peltier elements

In which to make another rectangle for two radiators so that they fit tightly into it.
DIY air conditioner based on Peltier elements

On the back side.
DIY air conditioner based on Peltier elements

This will be a dividing barrier - the cold side from the hot side.
To prevent radiators from slipping into the hole, you need to glue two strips of aluminum profile to the side. Buying it is not difficult at a hardware store.
DIY air conditioner based on Peltier elements

We dilute two-component glue based on epoxy resin (cold welding). And first we glue two radiators together, and then we glue the profile pieces to them.
DIY air conditioner based on Peltier elements

DIY air conditioner based on Peltier elements

We also glue the profile to the large radiator. This is what it looks like. The sides of the profile on both sides should be approximately in the same plane.
DIY air conditioner based on Peltier elements

We drill this sandwich right through: two strips on both sides along with chipboard.
DIY air conditioner based on Peltier elements

Next, lubricate the radiators with heat-conducting paste and install the elements in a row. We do not confuse the sides; all modules must face the bottom.
DIY air conditioner based on Peltier elements

We cover them on top with a new layer of heat-conducting paste.
DIY air conditioner based on Peltier elements

And press it with the second radiator. We carefully tighten everything with screws and nuts.
DIY air conditioner based on Peltier elements

The result is this design with 12 pins.
DIY air conditioner based on Peltier elements

For ease of connection we use a terminal block.
DIY air conditioner based on Peltier elements

As you may have noticed - three-pin. And all the modules in it are connected in common to the lower bus. And with red leads there are 3 elements to the top contact, and the other three to the middle one. This division was made specifically for our computer power supply, which has two 12 V buses and is in no way necessary.
DIY air conditioner based on Peltier elements

DIY air conditioner based on Peltier elements

We drill a hole in the chipboard for the wire and connect it to the block.
DIY air conditioner based on Peltier elements

We will screw fans to the radiators on both sides.
DIY air conditioner based on Peltier elements

DIY air conditioner based on Peltier elements

On the power supply unit, the negative wires and positive wires are also collected together in two channels.
DIY air conditioner based on Peltier elements

We also connect to the output through the connecting block.
DIY air conditioner based on Peltier elements

Everything is almost ready.
To start the block, in our case, it is necessary to short-circuit the switch outputs with a jumper.
DIY air conditioner based on Peltier elements

Air conditioner installation


An air conditioner can be installed in any window. To do this, such a bracket is made from a shaped aluminum profile.
DIY air conditioner based on Peltier elements

Which will clearly rest on the doors and prevent the entire structure from falling out.
DIY air conditioner based on Peltier elements

To close the gap not to the closed window, a strip of polycarbonate or other plastic is cut along the width of the air conditioner. And is inserted into the window groove.
DIY air conditioner based on Peltier elements

We press the entire structure with the equalizer.
DIY air conditioner based on Peltier elements

As you can see, I have a sliding window, but you will have to come up with your own mounting design.
The main thing is that one side of the device is on the street, and the other at home. And there was no draft through the cracks.

Result of work


The air conditioner is quite powerful; after all, 6 Peltier modules are used. The entire electrical power was 360 W, which is not small. Although it cannot be compared with a heat pump due to its very low efficiency. But even this model is enough to cool a small room.
Here is the result when running for the first time: the initial room temperature is 24 degrees Celsius.
DIY air conditioner based on Peltier elements

After about an hour of work, the temperature dropped to 20 degrees, which is, in my opinion, an excellent result!
DIY air conditioner based on Peltier elements

Watch the video


come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (6)
  1. Gregory
    #1 Gregory Guests May 6, 2019 08:13
    3
    I HAVE ALREADY DONE SO MUCH, THE TEMPERATURE FALLS BY 5 DEGREES AND THEY EAT CURRENT, IT'S NOT WORTH THE CARE!
  2. Rnd
    #2 Rnd Guests 30 June 2019 16:46
    2
    Figase, 360 W!
    It's cheaper and easier to leave the refrigerator door open.
    1. Gennady
      #3 Gennady Guests February 8, 2021 08:10
      2
      You are a schutnik, however, with a refrigerator it will not be possible to cool the room, not even a degree. Why? Think for yourself...
      1. Guest Yuri
        #4 Guest Yuri Guests 14 June 2021 15:02
        4
        A mobile air conditioner spends 800-1000 watts, cools by 5-10 degrees, even after reworking the air circulation system, by default it throws hot air out of the room, drawing in warm air from the street (-50% efficiency), plus it costs quite a bit, I think a homemade product has the right to life, put more elements and it will be normal.
  3. Guest Sergey
    #5 Guest Sergey Guests July 28, 2021 00:58
    1
    Not effective at all. Don't skimp on comfort, buy a split system.
    And for experiments... try blowing cold water onto a riser and see how the temperature drops.
  4. Lamer
    #6 Lamer Guests 19 June 2022 09:34
    0
    )) 30 Amps from a computer power supply...