How to repair burnt carpet

Carpet not only insulates the floor and makes walking on it pleasant, but also serves as a real decoration of the room, especially when it is in harmony with the interior of the room.
High-quality carpets can last for decades without losing their shape, structure and color. Of course, this requires constant and appropriate care.
Very often, carpets suffer from burns left by an unextinguished cigarette that accidentally fell on the carpet, a lit match that landed there instead of an ashtray, or a coal that flew out of the fireplace insert.
How to repair burnt carpet

Burn damage is especially noticeable in the form of dark spots on light-colored carpets. Moreover, they usually appear in the most visible places: around the coffee table or in front of the sofa.
Unfortunately, it is not always possible to prevent such damage, as accidents are difficult to control. However, do not be too upset, because there is one effective but simple solution that will help restore the carpet to its original appearance. What should we have at hand for this?

You will need:


  • the glue is quick-setting and better water-resistant;
  • glue gun;
  • a small brush and stick for applying glue;
  • scissors large and small;
  • wallpaper knife

How to repair burnt carpet

Algorithm for restoring carpet after a burn


With some persistence and accuracy, any adult can do this job.

Treatment of the burn site


Using small scissors, carefully remove burnt or melted carpet fibers without damaging the base of the product.

Preparation of intact villi


How to repair burnt carpet

They need to be cut off in those places of our carpet that are not visually visible, but have the same color as at the burn site. This could be an area under the sofa, behind furniture, etc. You can use the same small scissors for this.
How to repair burnt carpet

How to repair burnt carpet

Restoration of the main mass of villi


First, apply the glue mass from a glue gun to the damaged area and distribute it evenly over the surface using a brush and stick. We take most of the previously cut fibers and press them using the handles of large scissors to the base, covered with glue, holding them motionless for some time to set.
How to repair burnt carpet

Gluing lint at the burn site


Again, apply a little slightly heated glue and glue the remaining fibers in places where they are less dense, pressing with the handles of scissors. Then leave the treated area alone for a few minutes until the glue completely hardens.
How to repair burnt carpet

How to repair burnt carpet

Final finishing of the restored place


All that remains is to use small scissors to carefully trim the glued fibers to the height of the rest.
How to repair burnt carpet

How to repair burnt carpet
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
3+three=
Comments (0)