Simple rack for garden tools
An incredibly simple rack that can be made in a short amount of time will help you bring order to your shed or garage. Mounted on the wall, all your rakes, shovels, hoes and similar tools will be clearly stored without disturbing anyone.
Will need
- I took 2 pieces of boards measuring 38x68, 1.5 meters long.
- Drill press or drill with 32mm spade bit.
- A circular saw with the ability to set a cutting angle or a regular hacksaw for wood.
- Sanding block and sandpaper.
- Long wood screws.
Making a rack for garden tools
So, we adjust the two boards to the same length if they do not fit.
Let's mark it. You will need to make a hole first and then an oblique cut. The distance between such nests is 150 mm.
When everything is marked, take a feather drill and drill all the holes, but not through. If you immediately make a through hole, then the edge where the crease came out will not be smooth, but will have splinters sticking out.
Turn over to the other side.
And drill the hole all the way through.
Let's do all these manipulations for both bars.
Now, using a machine or a hacksaw by hand, we make an oblique groove.
Next, we sand the blanks to remove burrs and paint them.
Then we hang it on the wall using self-tapping screws if the wall is wooden. If not, then drill holes for dowels and attach them to the wall through metal corners.
You need to estimate the distance between the boards in advance, taking into account the minimum length of your tool.
After building such a rack, your shed will be in good order. The corners where this tool probably accumulated will be cleaned. Everything will be clearly visible and at hand.
Similar master classes
Particularly interesting
Comments (0)