Stickers


We will need: LASER printer, paper, tape, scissors, water. Here's the theory in a picture:
It’s simple: print the design you like on the printer, glue it with tape, and wash off the paper with water. The drawing remains on the tape. Let it dry and that's it! The sticker is ready - you can stick it on.


Now let's put the theory into practice:













After gluing the adhesive tape to the drawing, the adhesive tape is pressed firmly with the palm of your hand to the paper, then under a stream of cold water with fingers without burrs (or a soft brush) wash off the paper from the adhesive tape by rubbing, after washing off (removing) the paper, only the drawing remains on the adhesive tape!!! Next, you should wait until the tape with the pattern dries from the water and becomes sticky, the sticker is ready! In this way you can make watch dials, stickers for equipment, nameplates and much more.

There are a couple of disadvantages:
1) After water procedures, the tape loses its adhesive properties (but not completely)
2) The inscription or any drawing is limited in size by the width of the tape
3) You need to wash the paper on the sticker well, otherwise if the sticker is not glued and not completely erased, the remains of the paper will be visible.

All ! It seems that everything should be clear.
 
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
4 minus one =
Comments (7)
  1. Jew
    #1 Jew Guests 16 March 2011 18:28
    0
    I have an inkjet printer! sad
  2. Volt
    #2 Volt Guests 11 June 2011 19:22
    0
    It doesn’t work on inkjet, I’ll look for a friend to see if they have laser)
    are there any other ways?
  3. DarkBerk
    #3 DarkBerk Guests 6 July 2013 21:02
    1
    Thank you very much!!! Now I have my entire bike covered :lol:
  4. serg
    #4 serg Guests 13 October 2013 19:20
    0
    Are there any options for inkjet?
  5. Anya
    #5 Anya Guests 12 December 2013 16:56
    0
    Yes, are there any other options? I used this method myself, but there are probably others wink
  6. Alibek
    #6 Alibek Guests 19 February 2014 17:15
    0
    Thank you, my bike is covered in stickers.
  7. lady
    #7 lady Guests December 16, 2014 12:35
    0
    You can just cut a picture from a magazine wink