Brooch-jabot “Canon”

Decorating clothes with frill trim is distinguished by sophistication and elegance. But modern fashion trends allow you to wear neat frill brooches instead of large and fluffy collars.

Brooch frill


To create such a frill brooch you will need:
- a ribbon 0.7 cm wide, light green in color.
- blank for a brooch.
- glue gun.
- green satin ribbon 2 cm wide.
- scissors.

Description of work.
Cut three long strips from light green ribbon to create the base of the brooch. All segments must reach 16 cm.

cut out three long strips


Then we take each tape separately and glue the edges together, aligning them in the middle of the part. We also glue all three segments together.

glue the edges together


We receive such blanks. Now we collect a bow from them, placing one on top of the other, crossing them in the center.

We receive such blanks


We put the resulting part aside and begin to create blanks for the main bow. We prepare 6 identical pieces of green tape, each 8.5 cm long. Then carefully singe the cuts on all the pieces. And using a glue gun we connect the two edges of each piece together, creating loops from them.

blanks for bow


Now we attach these parts on top of the light green bow, aligning them, but retreating 2-3 mm from the edges.

attach on top


We attach the loops on the second side of the bow in the same way.

attach the loops


We get this double bow. Next, cut out two strips of light green ribbon, each 5 cm long.

eyelets


We singe their sections and glue them together into two loops. Then we attach these parts to the prepared bow, but placing them strictly diagonally and along the center.

double bow


We put the created bow aside and prepare a voluminous tail for it. To do this, cut 4 pieces 7 cm long from the green ribbon and burn the edges. We form loops from the three, and leave the last strip as a straight piece. Then we cut 10 strips from a light green ribbon, each 6 cm long. We also singe all the existing sections and glue them into a loop shape.
Now we place a piece of green ribbon vertically, it will serve as the basis for the tail of the brooch and glue 3 light green loops on the lower cut, folding them like a fan.

Brooch frill


Next, we attach one green loop along the base strip. We take two light loops and cover with them the place where the previous part was glued, directing them in different directions.

Brooch frill


It remains to gradually attach the last two green blanks, covering their sections with details from light green ribbons.

Brooch frill


Then we complete the created row of green blanks with an attached loop of light green ribbon.

Brooch frill


We get this tail for the brooch. We attach the previously set aside double bow to it. And in the center of the bow we glue a button wrapped in ribbon.

Brooch frill


We unfold the part with the wrong side up and glue the steel brooch blank.

Brooch frill


The frill brooch is ready!
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (0)