Cabinet

A pencil case will help organize the space in the hallway, where you can put hats, gloves, and shoes on the lower shelves. Moreover, making it with your own hands is not at all difficult. First you need to decide on the size of the cabinet and the number of shelves. In this master class it is proposed to make a cabinet 2.20 meters high, square in shape (40 X 40 cm) with five shelves. Next, the cabinet parts need to be cut out on a sheet of chipboard and edged. To do this, find any format-cutting shop in your city; in large cities, every construction hypermarket has one. Of course, you can cut out the parts with a jigsaw and make the edge yourself (with a hot iron or self-adhesive edge), but the cost of cutting is not so high as to risk right angles and economical placement on a sheet of chipboard. The calculation showed that the cost of the cabinet, which includes the price of a chipboard sheet, a fiberboard sheet for the back wall, the price of cutting and edging, is 50% of the cost of the finished product in the store.
So, the pencil case consists of 11 parts. The table shows their dimensions, the necessary work that needs to be ordered in the cutting and format shop, the dimensions are indicated in millimeters.

table


To calculate your sizes, use the following algorithm:
1. Determine the parameters of the cabinet - length X width X depth.
2.The dimensions of the side walls are length X depth.
3. Shelves – depth X (width - 2*chipboard thickness). In our case, the chipboard thickness is 16 mm.
4. Lower façade - usually 50-70 mm high, as wide as shelves.
5. Rear wall and door – (length - front height - 5 mm) X (width - 5 mm).
Also, do not forget to order 3 round holes in the door, with a diameter equal to the hinge (for example, 40 mm), located 100 mm from the top and bottom edges, the third hole exactly in the middle. The edge varies in thickness from 0.6 to 2 mm and material: paper and plastic. The best option is a 1 mm plastic edge.
Required tools and materials:
  • a drill with a confermate drill, aligned along the length of the confermate (in this case, 45 mm);
  • screwdriver with hexagon or manual hexagon;
  • conferments and decorative plugs for them;
  • square, tape measure and pencil.


All parts and tools


All parts and tools are ready, let's start assembling.
Step 1. On the side walls from the bottom we measure 58 mm (50 mm facade + 8 mm half the thickness of the chipboard, called the hole along the axes). Draw a line with a pencil, measure 100 mm from each edge on it - this is the place where the bottom shelf is screwed. Marks points for the facade: 25 mm from the bottom and 8 mm from the edge.

measured


Step 2. Measure 8 mm from the top of the side wall, draw a line and put 100 mm on the sides to make the holes symmetrical - this is the top wall of the cabinet.
The distance is measured between the lines in steps 1 and 2 - in our case it is 2134 mm. In addition to the top and bottom, there are 4 shelves left, therefore, 2134 / 5 = 427 mm. We draw lines every 427 mm, and also set aside 100 mm from the edges to make the holes symmetrical.

Side shelves


Step 3.We place the side shelves on 2 stools (carefully so as not to damage the stool) and drill holes at the prepared marked points.

sawn parts

marking

drill holes


Step 4. Next, measure 100 mm at the ends of the shelves and 8 mm along the axes. We make holes at the designated points in all shelves.

sawn parts

We do it at the designated points

We do it at the designated points


Step 5. We assemble the shelves, screw them to the side walls: first to one, then put the second wall and connect it to the shelves.

Assembling shelves

Assembling shelves

cabinet assembly


Step 6. On the short sides at the ends of the facade, drill holes at a distance of 25 mm from the bottom and 8 mm from the edge, screw the facade to the side walls of the cabinet.
Step 9. Installing the door: hinges are screwed into the ordered holes. Then the door is placed evenly against the cabinet and with an awl (core) marks are made for holes for self-tapping screws through the hinges themselves. You need to screw the door with someone's help. If you make a slight mistake, it’s not a big deal, since the loop itself is adjustable vertically and horizontally.

cabinet pencil case

Cabinet pencil case


The handle is screwed where it is convenient for you. The back wall is nailed with small shoe nails. If the room has a high baseboard, you can make semicircular recesses at the bottom of the cabinet using a jigsaw so that it fits snugly against the wall. For aesthetics, the confermates are closed with plastic plugs.
Enjoy it for your health!
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
4 minus one =
Comments (1)
  1. Guest Oleg
    #1 Guest Oleg Guests December 25, 2018 12:55
    1
    Where are steps 7 and 8?