Box made of newspaper tubes

To work you need to prepare:
- newspapers or sheets of newsprint;
- scissors;
- PVA glue;
- a skewer or thin knitting needle.

box made of newspaper tubes


To make tubes, cut the newspaper into 4 equal parts along the wide side.

box made of newspaper tubes


Place the skewer on the edge of the strip at an angle of about 30-40 degrees. The smaller the angle, the thinner and longer the tube will be.

box made of newspaper tubes


Pressing the newspaper tightly onto the skewer, twist the tube. Lubricate the remaining edge with PVA glue and glue it. The skewer must be carefully pulled out. Leave the tube to dry until completely dry. You need to make 150-200 of these tubes.

box made of newspaper tubes


We begin to weave the bottom. To do this, we fold two groups of tubes, six pieces each, into a cross - into a cross. The tubes can be secured together with glue.

box made of newspaper tubes


To weave, bend one tube in half. This tube is working. We braid all groups in turn with this tube.

box made of newspaper tubes


We make two such circles. When the working tube runs out, it is extended with a new tube. To do this, we insert the tubes into each other. There is no need to use glue.

box made of newspaper tubes


Braiding the next circle, we divide each group of tubes into three parts (two tubes each).

box made of newspaper tubes


We braid two circles.We make subsequent circles, braiding each tube separately. We weave a circle of the required diameter.

box made of newspaper tubes

box made of newspaper tubes


In order to finish weaving the bottom, you need to cut off the ends of the tubes and glue them on the inside.

box made of newspaper tubes


To weave the side walls, a mold is placed in the product. This could be a box, pan or jar. We bend the tubes that were braided and fasten them to the form (you can use clothespins).

box made of newspaper tubes


Weaving is similar to weaving the bottom. We fold the working tube in half and braid each base tube.

box made of newspaper tubes

box made of newspaper tubes


To complete the weaving of the walls of the box, we cut the working tubes and glue them to the inside of the box. The tubes that stick out from the walls are cut, glued and, secured with clothespins, left to dry completely.

box made of newspaper tubes


Weaving the lid for the box is done in the same way. The diameter of the lid should be larger than the diameter of the box. The box is painted after it has completely dried. The paint can be any: acrylic, gouache, watercolor or aerosol. For painting, mix paint with PVA glue in a 1:1 ratio. The glue will additionally saturate the tubes, giving the product rigidity. When dry, it becomes colorless without changing the tone of the paint.

box made of newspaper tubes


It is necessary to paint the inner side surface first, because... Drops of paint may leak onto the front side.

box made of newspaper tubes


Leave to dry for 15-20 minutes. The next stage is painting the bottom from the inside. After the paint has completely dried, the outside of the product is painted. The lid is painted in the same sequence: the inner side walls, the bottom from the inside and, lastly, the outer surface.

box made of newspaper tubes


After drying, the box can be opened with acrylic varnish.This gives it shine and makes it more durable.
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (0)