Hank Moody Bracelet

Probably, every person who watches TV series or just films also experiences their feelings and even partly their lives, but the most beloved characters by the audience pleasantly amaze with the right clothing accessories, be it earrings, a ring or a bracelet. Surely many who read this article adore the series “Californication” and its main character, Hank Moody, played by David Duchovny. And if you know this series, you couldn’t help but pay attention to the hero’s bracelet, and have been looking for the same one for a long time. Now this problem has been solved, in addition, there is no need to spend a lot of money on shipping from other countries for a bracelet. You can make it yourself, with your own hands.

To do this, to make your long-time dream come true, you will need the following tools and materials for work:
- scissors;
- thread with a needle (matching the color of the bracelet);
- leather cord – 2 meters;
- glue or varnish gel;
- matches or lighter;
- notepad or board;
- two clamps.

tools and materials for work


We cut 50 cm from our leather cord and fold it in half.

Cutting the leather cord


We secure the leather cord with clips on both sides, hooking it to a notepad or board.

pull the cord


We take the remaining part of the leather cord and sew the end of it from the side of the formed loop behind one part of the cord, as shown in the photo below.

let's start weaving


Now we move this cord forward and turn it over between two parallel lines, so to speak, the base of the bracelet. Of course, this “reversal” of the cord must be between these two basic lines!

Hank Moody Bracelet


We perform the same procedure on the other side.

Hank Moody Bracelet


We weave and alternate. This is what we get.

Hank Moody Bracelet


Don't forget to make sure that the sides are straight and not curved.
When you have already braided enough for your wrist, then, first of all, we sew the base cord with the one that braided it. Then, we cut off the unnecessary part of the cord and secure it, as in the beginning, with glue or gel polish. When the varnish or glue dries, carefully set it on fire.

Hank Moody Bracelet

Hank Moody Bracelet

Hank Moody Bracelet


Tie knots at the two ends of the base cord. That's it, your Hank Moody bracelet is ready! 

Hank Moody bracelets

Hank Moody Bracelet

DIY Hank Moody bracelet
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (0)