How to make a door latch with a code

In the garage, country house, utility room or tool cabinet we store a lot of necessary and valuable things. It is completely undesirable for them to be the property of strangers and random people. This can be achieved using a variety of door latches and latches, which can be purchased in stores for a lot of money. To save the family budget, latches can be made with your own hands from scrap metal and this does not require special knowledge and skills.

Will need

Materials:

  • 3 hex nuts;
  • round rod;
  • round washer;
  • 2 steel eyes;
  • iron nail;
  • steel rectangular plate;
  • handle and screw;
  • L-shaped counter part.

Tools: measuring and marking tools, drilling machine, welding, vice, circular saw, drill, hand screwdriver.

High-quality and durable drills on AliExpress at a discount - http://alii.pub/5zwmxz

Manufacturing process of digital coded door latch

On one of the faces of three standard nuts of the required size, mark the centers and drill radial holes.

On one end of the rod of the required length, which freely fits into the threaded holes of the nuts, we weld a washer, the outer diameter of which is larger than the diameter of the rod.

Welding electrodes for general purposes on AliExpress at a discount - http://alii.pub/606j2h

We put an eye and three nuts on the rod. We insert a marker sequentially into the holes of the nuts, and pressing them against the washer, we draw three belts on the rod.

Using a circular saw, we make grooves of a certain depth along the belts.

We draw a longitudinal line from the ring along the transverse grooves and, using a circular saw, cut a triangular groove along the rod to the depth of the transverse grooves.

We cut off the head of the iron nail, drill holes in the nuts to its diameter. We insert the pre-sharpened end of the nail in the shape of the grooves and grooves on the rod into the hole and weld it there. Cut the nail flush with the outer surface of the nut edge.

We repeat the described process for all three nuts.

We successively thread an eye, three nuts and a second eye onto the rod. We install the resulting assembly with the legs of the lugs on a rectangular plate and weld the first lug. Then we press the second eye so that the nuts rotate freely relative to each other, and weld the second eye to the plate.

On the faces of the nuts we apply or knock out numbers from 1 to 6. At the free end of the rod, in continuation of the longitudinal groove, we drill a through radial hole. From the side of the longitudinal groove, install a handle on the rod and fasten it with a screw.

Using screws through the holes in the rectangular plate and the counter part, we screw them respectively to the door frame post and the door leaf.

Having set the pre-selected three-digit code, we move the rod (crossbar) until its end enters the hole of the mating part. After changing the code, the door is securely closed. To open it, just dial the selected code and move the rod to the left.

Long-lasting discs for angle grinders on AliExpress at a discount - http://alii.pub/61bjly

Watch the video

come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
4 minus one =
Comments (0)