How to drill a bearing or tool steel with a cheap drill bit

Workpieces made of bearing or tool steel are difficult to drill. Despite their hardness, this can be done with the most common inexpensive concrete drill. To do this you just need to sharpen it a little.

What you will need:

  • Drill for concrete;
  • emery machine;
  • drill or drilling machine.

High-quality drills on AliExpress at a discount - http://alii.pub/5zwmxz

Drill conversion process

Typically, a concrete impact drill with a Pobedit tip has a slightly different sharpening angle, and therefore is in no way capable of coping with drilling steel. To make this work, it should be sharpened using sandpaper.

The soldering produces corners and sharp edges, as on conventional metal drills.

After such fine-tuning, the drill will be able to drill into hard steel.

Of course, it will not go into it like butter, like expensive universal or specialized drills, but it will still be able to drill hardened knife blades, files, and even a bearing ball.

Watch the video

come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
3+three=
Comments (0)