How to make a stove for working in a garage in just 1 hour

How to make a stove for working in a garage in just 1 hour

To heat your garage cheaply, you can make a stove that runs on waste. It will really help out if you have to service your car in winter. With it in the garage it will be warm, almost like in the house.

Materials:


  • copper tube 6 mm;
  • oil tank;
  • fire extinguisher housing;
  • computer cooler;
  • pipe 50-70 mm;
  • wire or fittings.

How to make a stove for working in a garage in just 1 hour

Furnace manufacturing process


It is necessary to cut 2 holes in the fire extinguisher for air supply and smoke exhaust. One is done at the bottom, the second on the opposite side from above.
How to make a stove for working in a garage in just 1 hour

How to make a stove for working in a garage in just 1 hour

A straight pipe 40-50 cm long is welded into the lower hole.
How to make a stove for working in a garage in just 1 hour

The chimney is welded on top. To do this, the pipes are cut at 45° and connected at right angles.
How to make a stove for working in a garage in just 1 hour

How to make a stove for working in a garage in just 1 hour

How to make a stove for working in a garage in just 1 hour

How to make a stove for working in a garage in just 1 hour

Weld the mount for the recycling tank to the air supply channel. It is a piece of tube with legs made of wire or fittings.
How to make a stove for working in a garage in just 1 hour

Closer to the fire extinguisher, a hole is drilled in the air pipe for the fuel supply. A copper tube is inserted into it. It needs to be bent and routed to the fastening to connect it to the tank.
How to make a stove for working in a garage in just 1 hour

How to make a stove for working in a garage in just 1 hour

A cooler is connected to the stove, preferably 3 pieces, an ignited rag soaked in diesel fuel is thrown into the fire extinguisher through the neck, then the waste is poured into the tank. As a result, the oil will burn.
How to make a stove for working in a garage in just 1 hour

How to make a stove for working in a garage in just 1 hour

When first started, the stove will smoke heavily until the paint on the fire extinguisher burns off. When this happens, the legs can be welded to it.
How to make a stove for working in a garage in just 1 hour

How to make a stove for working in a garage in just 1 hour

How to make a stove for working in a garage in just 1 hour

Watch the video


come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (2)
  1. Vitaly
    #1 Vitaly Guests 29 November 2020 17:32
    1
    The only advantage of such a stove is its ease of manufacture. Everything else is cons. Very low efficiency, direct flow, no oil supply control, etc. At least they could weld fins onto the fire extinguisher for better heat transfer.
  2. Snail Achatina
    #2 Snail Achatina Guests 30 November 2020 17:29
    0
    Will the fire extinguisher burn out quickly? The walls are not very thick. Now, if you adapt a carbon dioxide fire extinguisher like this, then yes. And yes, a considerable part of the heat simply flies away into the chimney.