How to make a vibrating sieve with a washing machine motor to sift out sand

How to make a vibrating sieve with a washing machine motor to sift out sand

When making reinforced concrete products, it is very important to use screenings or sand of the same fraction, so it must be re-screened to remove large inclusions. The easiest and fastest way to do this is on a vibrating sieve, which you can do yourself.

Materials:


  • electric motor from a washing machine;
  • profile pipe 20x20 mm;
  • strip 40 mm;
  • masonry mesh;
  • fine mesh metal mesh;
  • springs from the rear shock absorbers of the motorcycle - 4 pcs.;
  • wooden slats 20x20 mm;
  • thin sheet steel or tin.

Vibrating sieve manufacturing process


A frame is welded from a profile pipe to mount a sieve of the required size.
How to make a vibrating sieve with a washing machine motor to sift out sand

The masonry mesh is welded to it.
How to make a vibrating sieve with a washing machine motor to sift out sand

Wooden slats are screwed to the frame from the inside.
How to make a vibrating sieve with a washing machine motor to sift out sand

From a profile pipe you need to weld a mount for mounting an electric motor with sieve stands.
How to make a vibrating sieve with a washing machine motor to sift out sand

The engine is screwed on. An eccentric in the form of a flag is installed on its shaft to unbalance during rotation.
How to make a vibrating sieve with a washing machine motor to sift out sand

Then the motor must be covered with a casing. You can simply screw on a salad bowl or pan of a suitable size.
How to make a vibrating sieve with a washing machine motor to sift out sand

The sieve frame is welded to the motor mounting posts.
How to make a vibrating sieve with a washing machine motor to sift out sand

The table frame is welded from profile pipes.
How to make a vibrating sieve with a washing machine motor to sift out sand

How to make a vibrating sieve with a washing machine motor to sift out sand

Springs are welded to it at the corners, and the frame is already welded to them, but at an angle. For this, spacers from the corner are used.
How to make a vibrating sieve with a washing machine motor to sift out sand

How to make a vibrating sieve with a washing machine motor to sift out sand

How to make a vibrating sieve with a washing machine motor to sift out sand

Sides made of strips are welded on the sides and top of the sieve frame. 2 diagonals are welded to the table frame, directed in the opposite direction from the slope of the sieve. A jumper is welded between them. Then the tin is attached to the resulting sheathing.
How to make a vibrating sieve with a washing machine motor to sift out sand

How to make a vibrating sieve with a washing machine motor to sift out sand

A metal mesh with a fine mesh is installed on the sieve frame.
How to make a vibrating sieve with a washing machine motor to sift out sand

She needs a stapler to the slats. Now, when the engine starts, the sieve will vibrate, so screenings or sand thrown onto it can fall down, and large particles will be thrown to the side.
How to make a vibrating sieve with a washing machine motor to sift out sand

How to make a vibrating sieve with a washing machine motor to sift out sand

Watch the video


come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
5+two=
Comments (1)
  1. Sergey
    #1 Sergey Guests 27 November 2020 09:14
    1
    Sculpting an eccentric onto the motor shaft is not the best idea.You need to put the shaft on the motor and put an eccentric on the second shaft and connect them, for example, with a belt. Then the engine will live longer