Hot stand in the shape of a snail

Hot stand in the shape of a snail


This interesting stand for hot items in the kitchen can be made by anyone at home. For this we need:
• MDF board approximately 19 mm thick
• Acrylic paints - white and any other color
• Copy paper
• tracing paper
• Sandpaper
• File
• Vise
• Brush
• Pencil
Description of work
A stand for a spiral-shaped teapot is very easy to cut out of wood, and even easier from an MDF board!
Translate the given “Snail” motif onto tracing paper and enlarge it on a photocopier to the required size. The diameter of our stand is about 20 cm.



Transfer the contours of the motif onto an MDF board using carbon paper, secure the plate with the motif in a vice and cut the motif along the contour with a hacksaw in the direction from the outer end to the inner. Thoroughly clean all edges with sandpaper or a file and carefully remove abrasive dust. Prime the stand with white acrylic paint and let the paint dry completely. Then paint the top surface of the stand in the color of your choice.Attention: acrylic varnish is not heat-resistant, so if you plan to place a kettle with boiling water on the stand directly from the fire, do not coat the product with varnish!
come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
4 minus one =
Comments (0)