Now you can at least hang a horizontal bar on drywall

How to make the strongest mortgage for drywall to hang battery cabinets or a horizontal bar

Where the locker or other weight is attached to the plasterboard wall, you need to make a special embed from a board in advance. There are several secrets that will make it truly reliable.

Materials:


  • 25 mm board of the required width;
  • rail 60 mm;
  • wood screws;
  • self-tapping dowel;
  • U-shaped hangers.

How to make the strongest mortgage for drywall to hang battery cabinets or a horizontal bar

The process of making a mortgage


Markings are made at the place where the mortgage is attached.
How to make the strongest mortgage for drywall to hang battery cabinets or a horizontal bar

How to make the strongest mortgage for drywall to hang battery cabinets or a horizontal bar

The board itself will expand between the CD rack profiles. In the place opposite to where it fits, short pieces of the slats are inserted into the profile.
How to make the strongest mortgage for drywall to hang battery cabinets or a horizontal bar

How to make the strongest mortgage for drywall to hang battery cabinets or a horizontal bar

Next, trimmings of the UD profile along the width of the embed are prepared. They are screwed on the sides to the posts. Then the mortgage is split between them. It must be secured with self-tapping screws to the UD profile.
How to make the strongest mortgage for drywall to hang battery cabinets or a horizontal bar

Along the transverse mortgage, U-shaped hangers bent in half are screwed on the sides. With a standard step between the rack profile of 60 cm, 4 of them are needed, 2 each on top and bottom. They will connect the mortgage to the wall, which will provide additional rigidity.
How to make the strongest mortgage for drywall to hang battery cabinets or a horizontal bar

As a result, such a mortgage will support a weight of more than 100 kg. In addition, you can screw it to it anywhere horizontally, even opposite the CD profile.However, it is important that the racks themselves do not bend or dangle, so you need to place more crossbars between them.
How to make the strongest mortgage for drywall to hang battery cabinets or a horizontal bar

Watch the video


come back
Comment
  • bowtiesmilelaughingblushsmileyrelaxed relaxedsmirk
    heart_eyeskissing_heartkissing_closed_eyesflushedrelievedsatisfiedgrin
    winkstuck_out_tongue_winking_eyestuck_out_tongue_closed_eyesgrinningkissingstuck_out_tonguesleeping
    worriedfrowninganguishedopen_mouthgrimacingconfusedhushed
    expressionlessunamusedsweat_smilesweatdisappointed_relievedwearypassive
    disappointedconfoundedfearfulcold_sweatperseverecrysob
    joyastonishedscreamtired_faceangryragetriumph
    sleepyyummasksunglassesdizzy_faceimpsmiling_imp
    neutral_faceno_mouthinnocent
3+three=
Comments (2)
  1. Guest Vasily
    #1 Guest Vasily Guests 26 September 2020 22:01
    2
    When covering the walls with plasterboard according to the profile, remember that by stepping back 5 cm from the wall with a wall perimeter of 20 meters, you lose 1 square meter of room area.
  2. Sasha
    #2 Sasha Guests 27 September 2020 12:05
    1
    It’s a nightmare, how much grandfather lost space with such a retreat. But there’s not a lot of land, he’ll set up more rooms.